B85M boot loop with 1 beep after bluescreen

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

Hi everybody,

just an hour ago all of a sudden in the middle of a game I experienced a bluescreen saying "PAGE_FAULT_IN_NONPAGED_AREA". 
Then, on reboot, 1 beep sounds and the machine tries to restart again in an endless Loop. Entering the bios pages  not possible. The Monitor`s LED doesn`t turn green as usual but remains yellow. In my opion even if the SDD`s boot record should be  damaged I should be able to enter the bios or UEFI respectively by pressing F2. Am I right in this regard? Temperatures  in my region are  very high  these days (35 degrees Celsius - 95 degrees Fahrenheit). May that fact have been contributed to the Problem?

Thanks very much for every hint to the solution  in advance: droogy

Asrock B85M
I5-4570, boxed cooler
8 GB RAM
Win7 64bit
Toshiba SSD 250 MB
etc. 

Edited by droogy - 08 Aug 2015 at 11:43pm

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
droogy Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 08 Aug 2015 Status: Offline Points: 3	Post Options Post Reply Quote droogy Report Post Thanks(0) Quote Reply Topic: B85M boot loop with 1 beep after bluescreen Posted: 08 Aug 2015 at 11:40pm
	Hi everybody, just an hour ago all of a sudden in the middle of a game I experienced a bluescreen saying "PAGE_FAULT_IN_NONPAGED_AREA". Then, on reboot, 1 beep sounds and the machine tries to restart again in an endless Loop. Entering the bios pages not possible. The Monitor`s LED doesn`t turn green as usual but remains yellow. In my opion even if the SDD`s boot record should be damaged I should be able to enter the bios or UEFI respectively by pressing F2. Am I right in this regard? Temperatures in my region are very high these days (35 degrees Celsius - 95 degrees Fahrenheit). May that fact have been contributed to the Problem? Thanks very much for every hint to the solution in advance: droogy Asrock B85M I5-4570, boxed cooler 8 GB RAM Win7 64bit Toshiba SSD 250 MB etc. Edited by droogy - 08 Aug 2015 at 11:43pm

Xaltar Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 16 May 2015 Location: Europe Status: Online Points: 24653	Post Options Post Reply Quote Xaltar Report Post Thanks(0) Quote Reply Posted: 09 Aug 2015 at 1:14am
	I would try reseating your RAM and clearing CMOS. I prefer the battery removal method as it clears everything, just be sure to let the system sit without the battery for at least 4 hours with no power connected to the PC. Also be sure to press and hold the power button once the power is disconnected to discharge any residual power. If this does not work we will have to dig deeper.

parsec Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 04 May 2015 Location: USA Status: Offline Points: 4996	Post Options Post Reply Quote parsec Report Post Thanks(0) Quote Reply Posted: 09 Aug 2015 at 1:41pm
	That BSOD error is related to a hardware failure, usually memory. If could also be the video card, if you are using one. You aren't getting any video signal to the monitor, so it could be a DRAM memory failure or the video card broke. If you use a video card, remove it from the PC and connect the monitor to the Intel iGPU connections on the IO panel and try to start the PC.