|
[Beebox 3150] Usb always powered on |
Post Reply 
|
| Author | |
custom 
Newbie 
Joined: 22 Aug 2016 Status: Offline Points: 4 |
 Post Options
 Thanks(0)
 Quote Reply
 Topic: [Beebox 3150] Usb always powered onPosted: 22 Aug 2016 at 6:49pm |
|
Hi, I've updated the bios of the Beebox, now I am using the release 1.60, but there is no way to shutdown the power on usb ports when the pc is switched off.
I mean also when I switch off the pc by Windows or I press for more than 5 seconds the power button. The power is always on, even if I remove the power cord and attach it again. I've set the wake on usb mouse/keyboard to disabled, but nothing happens. Is there a way to solve this problem?
|
|
 |
|
|
parsec
Moderator Group 
Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
Post Options
Thanks(0)
Quote Reply
Posted: 23 Aug 2016 at 11:30am |
The always powered on USB ports is considered a feature, for charging cell phones and other devices from the PC when it is shutdown, for example. This also allows starting the PC with the mouse, keyboard, or remote control. But some people don't like to have the USB ports powered on all the time. Note that I said shutdown, while you said "switched off". They are two different things. All mother boards use some power from their PSU when they are in a Windows Shutdown state, as long as the PSU is switched on or connected to AC power. A mother board is never completely "switched off" unless its power supply is shut off with its own power switch, or disconnected from AC power. The networking chip(s) will always be awake, and the system that monitors the power switch on the PC case is also always powered up. Disabling the Wake on USB mouse or keyboard will not disable the power to the USB ports. As soon as the power cord is connected, the USB ports will be able to power a device. Some ASRock boards have an option in their BIOS called Goodnight LED. That allows removing power from the USB ports when the PC is shutdown. That option is usually in the Chipset Configuration screen. I don't see this option in your PC's BIOS, it may not have it. Why is the power on the USB ports when the PC is shutdown a problem for you? If nothing is connected to the USB ports, no power is being drawn/used from them. |
|
|
|
|
|
|
custom
Newbie
Joined: 22 Aug 2016 Status: Offline Points: 4 |
Post Options
Thanks(0)
Quote Reply
Posted: 28 Aug 2016 at 9:00pm |
|
I've written "Switch off", I was meaning "Shutting down", sorry! :) Hi It's a big problem for two reasons:1. I am using an external wifi dongle because the internal wifi antenna is very weak (tried on three different beebox, so the problem it is not mine!). When I shut down the mini pc the dongle is on and also its three leds. 2. I am using the Beebox as mediacenter with a WD external hard drive. Unfortunately this hdd has a standby led always on if the usb ports are powered. So everytime I shut down the minipc I have manually to remove the two usb items and it is annoying. Last week I've removed too quickly the hdd so I broke the file system and lost all the files (I was lucky done a backup two days before). So it is a problem :) |
|
|
|
|
SantoPaps
Newbie
Joined: 29 Jan 2018 Status: Offline Points: 24 |
Post Options
Thanks(0)
Quote Reply
Posted: 04 Feb 2018 at 9:52pm |
|
|
|
ASRock_TSD
ASRock_Official 
Joined: 20 Mar 2015 Status: Offline Points: 8787 |
Post Options
Thanks(0)
Quote Reply
Posted: 14 Jun 2018 at 12:08pm |
|
Dear Custom,
Thanks for posting your query to ASRock forum. Sorry for the late reply, hopefully this advice can still be helpful. Kindly go to BIOS and adjust Deep S5 to Auto. Advanced\Chipset Configuration\Deep S5 After adjusting Deep S5 in BIOS kindly press "F10" button to save and exit. This should allow you to disable USB power when system if off. With thanks, ASRock TSD |
|
|
|
|
Tom Tiller
Newbie
Joined: 09 Mar 2019 Status: Offline Points: 1 |
Post Options
Thanks(0)
Quote Reply
Posted: 09 Mar 2019 at 8:31pm |
|
I have been struggling with the same problem. (Beebox 3150, firm: 1.70)
I have turned off "everything" in the BIOS and S5 is set to auto, in Win10 the USB HUB power management is set to enable but the USB power still remains on after the Beebox is "powered off". It is OK that it is a feature but very annoying if it is impossible to turn off because the external devices that are powered from USB (DAC, HDD) remain always on. |
|
|
|
|
ASRock_TSD
ASRock_Official
Joined: 20 Mar 2015 Status: Offline Points: 8787 |
Post Options
Thanks(0)
Quote Reply
Posted: 27 Mar 2019 at 12:17pm |
|
Dear Tom,
Thanks for posting your query to ASRock forum. We have checked again with 1.70 BIOS. With "Deep S5" set to "Auto" USB light will be off after shutdown. Please load BIOS default then set the "Deep S5" to "Auto" (Make sure to press F10 to save settings in BIOS) Also please try the suggestions below to disable the Fast Startup setting. 1. To disable Fast Startup, go to Start > Control Panel > Power Options and click "Choose what the power buttons do" from the column on the left. 2. Scroll down to "Shutdown settings" and uncheck the box for "Turn on fast startup". 3. Click the "Save changes" button to apply the changes. 4. After the setting is applied, please shut down and see if the light will go off. With thanks, ASRock TSD |
|
|
|
|
Rezaf904
Newbie
Joined: 03 Feb 2020 Location: Indonesia Status: Offline Points: 1 |
Post Options
Thanks(0)
Quote Reply
Posted: 03 Feb 2020 at 5:58pm |
|
i've same problem, when PC down but USB keep powered, i am using ASRock A320M HDV R4.0, please help me :(
|
|
|
|
|
Post Reply
|
|
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
![RSS Feed - [Beebox 3150] Usb always powered on](forum_images/rss.png "RSS Feed: [Beebox 3150] Usb always powered on")
Topic Options
custom wrote: