Core Voltage OFFSET for UV where in BIOS£ |
Post Reply |
Author | |
lawshadow
Groupie Joined: 26 Dec 2022 Status: Offline Points: 295 |
Post Options
Thanks(0)
Posted: 26 Jun 2023 at 9:29am |
Hi all,
So i used Intel XTU and undervolted my i7 13700K results: Core voltage offset results Undervolt: -0.050v = 76c Undervolt: -0.065v = 75c Undervolt: -0.100v = 72c = a drop of 11c not bad at all. But how do i set it up in Asrock Z790 Taichi MB BIOS? Can some one please guide WHICH settings i need to change this is my first try at UV and DO NOT want to mess up, even tho this shouldn't be to hard to do but just in case. I looked around couldn't find "core offset" values. Many thanks in advance. |
|
lawshadow
Groupie Joined: 26 Dec 2022 Status: Offline Points: 295 |
Post Options
Thanks(0)
|
Seriously no one?
|
|
ASRock_TSD
ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8787 |
Post Options
Thanks(1)
|
Hi lawshadow,
Thank you for your post. Please go to the below BIOS path to set the CPU offset voltage. BIOS\OC Tweaker\Voltage Configuration CPU Core/Cache Voltage set to "Offset mode" Offset voltage(mV) set to -100 to meet your -0.1V setting. After that, please press [F10] to save the setting. All the best ASRock TSD |
|
Mazigazi
Newbie Joined: 25 Jun 2024 Status: Offline Points: 15 |
Post Options
Thanks(0)
|
Hi, how can i set the voltage offset to -120 which i found to be optimal for my system (I have Asrock Nova z790)
I have enabled the OC mode under CPU CORE/Cache Voltage but i wont let me get lower than-100mv |
|
mdskfx
Newbie Joined: 23 Apr 2024 Location: Indiana Status: Offline Points: 240 |
Post Options
Thanks(0)
|
If you have the latest Intel BIOS it may not let you go that far. You may have to set it at -100 in the BIOS and then use XTU to set the other -20?
|
|
Sueiroli
Newbie Joined: 23 Jul 2024 Location: USA Status: Offline Points: 35 |
Post Options
Thanks(0)
|
What can I do if Cebabench keeps crashing after I did the chances. What can I move to still be getting good temperatures and no crashes?
|
|
mdskfx
Newbie Joined: 23 Apr 2024 Location: Indiana Status: Offline Points: 240 |
Post Options
Thanks(0)
|
you would need to raise the core voltage back to -100 if you're still at -120. OC is a long process for us newbie people. try to move only 1 thing at a time and track your findings so you know if you're getting better or worse performance. I would suggest a better CPU cooler too. If not using an AIO, I would suggest the Thermalright Peerless Assassin/ Spirit dual tower. This is how I was able to get a good OC for my CPU.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |