ASRock ab350m-HDV GFX/SoC voltage

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello,

I'm running an Ryzen 2400g CPU and trying to OC the GPU to 1500/1600Mhz.
After reading a lot of articles about overclocking the GPU and voltages i gave it a go.

System specs:
Ryzen 2400G (3.9Ghz at 1.375v)
16GB DDR4 Corsair vengeance LPX (3000Mhz 2x8GB Dual channel) at 3443Mhz on 1.40v
ASRock ab350m-HDV (Bios firmware 1.70)
Be Quied! Shadow rock LP (max temp full load 61c)
Aerocool playa slim with 450watt PSU

After a lot of trying and testing it got the GPU running at 1500/1600Mhz, but i had to set the SoC and GFX to 1.25v/1.35v to get it even running. If i use lower values i get BSOD screens. Now a lot of people are using max values of 1.2 Soc and 1.2/1.3 for the GFX. What i understand is that in general these values are considered "safe". My values are higher and me be in the danger zone. Is there anything i'm doing wrong and might have forgotten to do.

Any help/tips are welcome!

Kind regards,
Ferdinand

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Xraption Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 26 May 2019 Status: Offline Points: 3	Post Options Post Reply Quote Xraption Report Post Thanks(0) Quote Reply Topic: ASRock ab350m-HDV GFX/SoC voltage Posted: 27 May 2019 at 12:19am
	Hello, I'm running an Ryzen 2400g CPU and trying to OC the GPU to 1500/1600Mhz. After reading a lot of articles about overclocking the GPU and voltages i gave it a go. System specs: Ryzen 2400G (3.9Ghz at 1.375v) 16GB DDR4 Corsair vengeance LPX (3000Mhz 2x8GB Dual channel) at 3443Mhz on 1.40v ASRock ab350m-HDV (Bios firmware 1.70) Be Quied! Shadow rock LP (max temp full load 61c) Aerocool playa slim with 450watt PSU After a lot of trying and testing it got the GPU running at 1500/1600Mhz, but i had to set the SoC and GFX to 1.25v/1.35v to get it even running. If i use lower values i get BSOD screens. Now a lot of people are using max values of 1.2 Soc and 1.2/1.3 for the GFX. What i understand is that in general these values are considered "safe". My values are higher and me be in the danger zone. Is there anything i'm doing wrong and might have forgotten to do. Any help/tips are welcome! Kind regards, Ferdinand