ASRock.com Homepage
Forum Home Forum Home > Technical Support > HTPC&Gaming Barebone&Others
  New Posts New Posts RSS Feed - Beebox n3150 actual power usage
  FAQ FAQ  Forum Search Search  Events   Register Register  Login Login

Beebox n3150 actual power usage
 Post Reply Post Reply
Author
Message
  Topic Search Topic Search  Topic Options Topic Options
Bluesmanuk View Drop Down
Newbie
Newbie


Joined: 28 Nov 2015
Location: UK
Status: Offline
Points: 41 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Bluesmanuk Quote  Post ReplyReply Direct Link To This Post Topic: Beebox n3150 actual power usage
    Posted: 12 Apr 2016 at 5:57am
Whilst I can see that the ac adapter is rated at 12v/36w, it seems not uncommon for such devices to be supplied with aca adapters that are essentially more than is needed.

In contrast to another box that I have, the Tronsmart ARA X5 with Cherry Trail Z8300, where the ac adapter is 5v/3a, a very small amount of power required to operate.

I quite understand that under very heavy load usage that more power will be required but it made me wonder, when used simply as a media player attached to a TV, what real world power usage the N3150 would have.
Beebox N3150
Back to Top
Xaltar View Drop Down
Moderator Group
Moderator Group
Avatar

Joined: 16 May 2015
Location: Europe
Status: Online
Points: 25073 		Post Options Post Options   Thanks (1) Thanks(1)   Quote Xaltar Quote  Post ReplyReply Direct Link To This Post Posted: 12 Apr 2016 at 6:29am
That is an interesting question. I don't have a beebox to test with but I do have an N3150M motherboad paired with an SSD, 400w 80plus bronze PSU and an 8gb dual channel DDR3 1600 RAM kit.

My system uses about 36w at the wall under full load (prime 95 + furmark). Now given that my PSU is only at about 10% utilization that means the 400w bronze rated PSU is only operating at about 55-60% efficiency under such a light load. Add to that 2 120mm fans, one intake and one exhaust (exhaust built in to the PSU) and we see a figure of about maybe 25w under full load if the PSU was 100% efficient.

My guess is that standard configuration Beebox would use about 20w under full load given the power brick is much more efficient at that load. Obviously mileage will vary somewhat depending on configuration, adding a mechanical HDD for example could increase that figure significantly. 

The power brick will be designed to accommodate the unit's maximum configuration power draw so 2 RAM modules, an mSATA SSD, mechanical hard disk, wifi card and any additional USB devices you may choose to connect. I would hazard a guess that there would be maybe a 6 - 10w buffer over and above the maximum predicted draw.

I hope this helps.
Back to Top
Bluesmanuk View Drop Down
Newbie
Newbie


Joined: 28 Nov 2015
Location: UK
Status: Offline
Points: 41 		Post Options Post Options   Thanks (0) Thanks(0)   Quote Bluesmanuk Quote  Post ReplyReply Direct Link To This Post Posted: 12 Apr 2016 at 12:34pm
Originally posted by Xaltar Xaltar wrote:

That is an interesting question. I don't have a beebox to test with but I do have an N3150M motherboad paired with an SSD, 400w 80plus bronze PSU and an 8gb dual channel DDR3 1600 RAM kit.

My system uses about 36w at the wall under full load (prime 95 + furmark). Now given that my PSU is only at about 10% utilization that means the 400w bronze rated PSU is only operating at about 55-60% efficiency under such a light load. Add to that 2 120mm fans, one intake and one exhaust (exhaust built in to the PSU) and we see a figure of about maybe 25w under full load if the PSU was 100% efficient.

My guess is that standard configuration Beebox would use about 20w under full load given the power brick is much more efficient at that load. Obviously mileage will vary somewhat depending on configuration, adding a mechanical HDD for example could increase that figure significantly. 

The power brick will be designed to accommodate the unit's maximum configuration power draw so 2 RAM modules, an mSATA SSD, mechanical hard disk, wifi card and any additional USB devices you may choose to connect. I would hazard a guess that there would be maybe a 6 - 10w buffer over and above the maximum predicted draw.

I hope this helps.

Thank you for the reply and information, which will always be useful Smile
Beebox N3150
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.04
Copyright ©2001-2021 Web Wiz Ltd.

This page was generated in 0.109 seconds.