H110 BTC Pro

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi all,Just wanted to see if anyone could tell me what they think is going on with my system.
I am using the H110 BTC Pro MB, and so far it's been fine.
I recently moved the MB from 1 location in my house to another. At the time I had 8 AMD cards and 1 Nvidia card installed on it. All working completely fine....

After the move, I can't get more than 7 cards to run stable. I have tested all the risers and I'm 100% sure they are all ok. I have started with 1 gpu at a time, then adding as I prove the system is stable. 
However, each and every time I go to put an 8th card in, the mining software starts, but then it shuts down and reboots. Again, I haven't changed any settings since the move. 

I have tired removing all OC's. Still the same. 

I'm using 2 PSU's. 1 x 1200W & 1x 850W. With the 8/9 cards in the system, I should have no power issues. 

Any help would be greatly appreciated.
Kind regards,
Mort

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
mort78 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 08 Feb 2018 Status: Offline Points: 3	Post Options Post Reply Quote mort78 Report Post Thanks(0) Quote Reply Topic: H110 BTC Pro Posted: 08 Feb 2018 at 12:15pm
	Hi all, Just wanted to see if anyone could tell me what they think is going on with my system. I am using the H110 BTC Pro MB, and so far it's been fine. I recently moved the MB from 1 location in my house to another. At the time I had 8 AMD cards and 1 Nvidia card installed on it. All working completely fine.... After the move, I can't get more than 7 cards to run stable. I have tested all the risers and I'm 100% sure they are all ok. I have started with 1 gpu at a time, then adding as I prove the system is stable. However, each and every time I go to put an 8th card in, the mining software starts, but then it shuts down and reboots. Again, I haven't changed any settings since the move. I have tired removing all OC's. Still the same. I'm using 2 PSU's. 1 x 1200W & 1x 850W. With the 8/9 cards in the system, I should have no power issues. Any help would be greatly appreciated. Kind regards, Mort