DeskMini 110: size of case screws?

bogon wrote: I'm about to order my DeskMini, but I want to add some thumbscrews onto the order to replace the case screws. Can somebody confirm that the size is the common #6-32 (3.51 mm diameter) and not something else like the M3 (3 mm diameter).

The four case screws are NOT 6-32, I can tell you that since I own a DeskMini 110W.

The four case screws ARE 6-32 threaded, and the thumbscrews I tried also fit fine.

I also regularly replace the thumbscrews provided with standard PC cases with larger head (headed?) thumbscrews, so I have some to actually check if they fit. They clearly won't, simply by looking at both of the screws.

Next, while the size of DeskMini case screws appear to be the same as the screws used to hold mother boards in place on standard PC case standoffs, the threads on the DeskMini's case screws are more coarse than those screws.

Imagine the screws provided with PC PSU's, that tend to have a hex head on them, besides the philips screw driver slots. That is the type of threads on the DeskMini's four case screws, whatever size that is, I'm not sure what it is.

The four case screws are really the only thing I was less than happy about with my DeskMini 110W. They are very small. But I can see the point of using those screws, they fit the general design idea of small and clean. I found some screws with larger heads that fit perfectly, in my PC screw collection. I must warn you to not over tighten any screws on the DeskMini case, since it is all too easy to strip the threads of any small screws.

Frankly, large thumbscrews would look out of place on the DeskMini IMO, but of course that is subjective.




Edited by parsec - 16 Nov 2016 at 10:36am

fyi, i received word back from tech support. "the case- screws are 6-32 *L4".