Z170 Extreme 4+ Suspend to RAM issue

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Knowing that I'd venture iIt was most likely the +5VSB was lower than it should be.

Anyway, good to hear you have it sorted and running.
< id="kpm_plugin" ="application/x-KPMPlugin">

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
wardog Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447	Post Options Post Reply Quote wardog Report Post Thanks(0) Quote Reply Posted: 05 Dec 2015 at 3:14am
	Knowing that I'd venture iIt was most likely the +5VSB was lower than it should be. Anyway, good to hear you have it sorted and running. < id="kpm_plugin" ="application/x-KPMPlugin">

Askannon Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 02 Dec 2015 Status: Offline Points: 7	Post Options Post Reply Quote Askannon Report Post Thanks(0) Quote Reply Posted: 05 Dec 2015 at 3:38am
	Actually after putting in the 530W PSU I figured out that it was not the PSU. What makes the difference between working and not working S3 is connecting the S-ATA power connector of the USB 3.1 front panel that comes with the "+" version of the "Z170 Extreme 4". Even if nothing is connected to either of the 2 provided USB ports. So even with the 400W PSU if this S-ATA power connector is not plugged in STR works. Plug it in and it breaks. Same thing is happening with the 530W. I just didn't notice this before because I only pugged in the essential devices and no the front panel S-ATA power when testing with the 530W. But once I plugged it in the 530W PSU also goes into this stupid endless loop breaking STR. There is ONE way however to make it all work with the 530W only tho: I have to connect the USB 3.1 front panel S-ATA to its own cord coming from the PSU. I can't connect anything else to the same cord or it will break again. This workaround only works with the 530W but not with the 400W PSU. IMHO this is very strange considering that there is no USB device connected to that front panel.
	Intel Core i7-6700 ASRock Z170 Extreme 4+ 4x8GB G.Skill DDR4 3200 Gigabyte GTX 760 4GB be quiet! Straight Power 10 400W Samsung 850 EVO 2TB Fractal Design Define R5