Z87 Extreme 9ac Issue |
Post Reply |
Author | |
Asrock_Kid
Newbie Joined: 21 Sep 2018 Location: USA Status: Offline Points: 18 |
Post Options
Thanks(0)
Posted: 21 Sep 2018 at 3:24am |
Seeing if anyone in public area can lend some tips I have this mobo from mid 2014. It's been sitting in a case until now. I have an odd issue with mobo not powering on, an odd mobo/psu issue. The
PSU is a new Corsair AX860i. The main power cord is one plug on mobo
side that splits out to two smaller plugs on PSU side. The PSU has a
relay inside that will click on (or off) if the PSU senses an issue.
What the issue is exactly I don't know but when I insert either of the
two plugs into PSU side the PSU relay clicks, thus it will not provide
power to mobo. This Z87 mobo has two 8 pin power plugs on the side that I am not using. Are these power plugs required to be used? The
system is rather basic, GeForce GTX760 video, intel zeon, 128GB ram,
Corsair cpu water cooler, three solid state sata drives, one DVD drive,
and 3 fans (push-pull on cooler, and one in case up front). Warranty is a no-go, too old. I did inspect the mobo out of the box, did not see anything obvious, it looks good. I do not have another PSU to test with. |
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 25073 |
Post Options
Thanks(0)
|
You need to connect at least 1 8 pin (CPU) power cable to the board or it will not power up.
|
|
|
|
Asrock_Kid
Newbie Joined: 21 Sep 2018 Location: USA Status: Offline Points: 18 |
Post Options
Thanks(0)
|
Are you talking about 1 of the 2 8pins on the side of the mobo, AND the 24pin mobo connector to the PSU? See the pic I attached. I thought the mobo manual says the 8pins provide power (optional) to a 12phase regulator? Should I connect both of the 8pin power sockets to PSU? The PSU has the room for it. |
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 25073 |
Post Options
Thanks(0)
|
Yes, those 2 8pin connectors. The top one (as per the pic) is 100% required, the one below is optional (not needed unless you are using multiple GPUs or other high power PCIe add in cards).
|
|
|
|
Asrock_Kid
Newbie Joined: 21 Sep 2018 Location: USA Status: Offline Points: 18 |
Post Options
Thanks(0)
|
This apparently has solved the issue. Now onto BIOS settings and OS install. Hopefully this PSU will stay stable. Thanks.
|
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 25073 |
Post Options
Thanks(0)
|
Happy to help, enjoy the build
|
|
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |