X670E PG Lightning no post

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   So I just received my x670e PG Lightning and I installed it in my system with a 7900x and some Gskill flare X5 F5-6000J3636F16GX2-FX5
2 sticks of 32GB Expo memory. I am trying to start my PC fans come on full speed and Dram and CPU lights are on solid red.

I have reseated my CPU and reseated my ram and tried individual sticks installed according to the manual.

I only plugged in the 4+4 ATX12V1 connector the V2 is not connected as the manual mentioned it was optional.

Still cannot get it booted I checked, double and triple checked all the connections. I am honestly a bit stumped on what to do right now so any help would be appreciated 

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Thirdhero Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 15 Sep 2023 Status: Offline Points: 20	Post Options Post Reply Quote Thirdhero Report Post Thanks(0) Quote Reply Topic: X670E PG Lightning no post Posted: 15 Sep 2023 at 4:30pm
	So I just received my x670e PG Lightning and I installed it in my system with a 7900x and some Gskill flare X5 F5-6000J3636F16GX2-FX5 2 sticks of 32GB Expo memory. I am trying to start my PC fans come on full speed and Dram and CPU lights are on solid red. I have reseated my CPU and reseated my ram and tried individual sticks installed according to the manual. I only plugged in the 4+4 ATX12V1 connector the V2 is not connected as the manual mentioned it was optional. Still cannot get it booted I checked, double and triple checked all the connections. I am honestly a bit stumped on what to do right now so any help would be appreciated

ASRock_TSD Members Profile Send Private Message Find Members Posts Add to Buddy List ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8787	Post Options Post Reply Quote ASRock_TSD Report Post Thanks(0) Quote Reply Posted: 19 Sep 2023 at 6:33pm
	Dear Thirdhero, Thank you for the posting. For this case, please kindly refer to the following suggestions to see if the system can post. 1. Please refer to the user manual on page 6 No.26 and page 35 to try clear CMOS. User manual: https://download.asrock.com/Manual/X670E%20PG%20Lightning.pdf 2. Please install only one memory module on the slot B2. 3. Repeat step 2 and install the memory module in other slots and try. 4. Please make sure memory module is installed properly, we recommend using both hands to install the module firmly. 5. Please install only the CPU, CPU cooler, one memory module (slot B2) and keyboard on the system to check if the system can POST. (Remove other devices such as the USB devices and SSD) 6. Please re-plug the power supply cable. 7. Please reinstall the CPU to try. Also make sure the CPU socket is not pin bent. 8. If possible, please try with another CPU, memory module, and power supply. Thank you Yours truly, ASRock TSD

Xaltar Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 25073	Post Options Post Reply Quote Xaltar Report Post Thanks(0) Quote Reply Posted: 19 Sep 2023 at 7:15pm
	Try powering up the system and leaving it powered up for 10mins or so. Sometimes the first POST can take an insanely long time. It seems to be particularly common with AM5.


rouki999 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 28 Nov 2022 Status: Offline Points: 145	Post Options Post Reply Quote rouki999 Report Post Thanks(0) Quote Reply Posted: 23 Sep 2023 at 12:53pm
	I have the same issue with my X670E RS. My System is a 7950x with 2x 32 GB Ram (F5-5600J3036D32GX2-TZ5RK). The system is running fine and sometimes the BIOS is hanging in the POST. It only helps to reset the BIOS! After reset from the BIOS the system is booting again. Then you have to set your BIOS settings again. If I switch to the XMP profile from the DRAM. It takes minutes to boot the first time with this settings. You don´t know is the BIOS hanging again or is it doing something. You have no screen or something else. Only the CPU and DRAM LED is red. I think there big problems in the BIOS! I don´t know what the problem is, but I can say, I will not buy a Asrock Mainboard again. The BIOS is one the worst in compare to the others supplier for AMD. It takes much longer to get a new stable BIOS version in compare to the others. Only the price is better, but in form of stability and fast support, then I will pay a couple of ??more for that.