|
Asrock 990 FX killer with Samsung SM951 |
Post Reply 
|
Page <1 345 |
| Author | |||
aberdeen 
Newbie 
Joined: 23 Oct 2015 Location: RO Status: Offline Points: 7 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: 25 Oct 2015 at 2:15pm |
||
|
|||
 |
|||
|
peterpiper
Newbie
Joined: 09 Nov 2015 Status: Offline Points: 1 |
Post Options
Thanks(0)
Quote Reply
Posted: 09 Nov 2015 at 2:09am |
||
|
I'm interested if anyone's managed to do a M2 Win10 install on a Fatal1ty 970 Performance. Particularly as that's the board I'm now considering.
This thread also very helpful in making me realise the M2 socket bandwidth on the Fatal1ty 970 Performance is 20GB/sec bandwidth compared to 10 GB/sec on ASRock 990FX Killer. Is seems very strange for ASRockto half the M2 channels on the 990FX, which I guess is a later board. I'd been considering he 990FX, but as M2 support is higher on my list than NVIDIA® SLI support the 970 Performance looks a better bet.
and earlier:
Your Windows 10 installation appearance in Disk Management shows the WIN10INSTAL as FAT32 (I think that's on your Intel board), then that could be your problem as you say your trying the same USB installation on the AMD. Have you instead tried, as net2paul suggested, making a new USB installation, then installing with the single M2 being the only drive present? His install is showing just the SM951 SSD (C:) yet no install ?? Edited by peterpiper - 09 Nov 2015 at 2:43am |
|||
|
|||
|
net2paul
Newbie
Joined: 12 Aug 2015 Location: Romania Status: Offline Points: 26 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 Nov 2015 at 12:31am |
||
  As you can see, I use PCie Card Adapter that working great with Samsung SM951 and Asrock 990FX killer mainboard. I put on PCiE 2 the card with SM951 and the video card on PCie3 slot. No change on Bios. Windows10 booting without issues !!!! Here is the PCie card wendor link : So we can double the SM951 speed on 990FX killer and don't need to downgrade to 970 Performance ! Also you can put a second slower M.2 card on mainboard.
Edited by net2paul - 18 Nov 2015 at 12:44am |
|||
|
|||
|
parsec
Moderator Group 
Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 Nov 2015 at 2:01am |
||
|
net2paul,
 Nice, Nice, Nice!!I'm thrilled with your results for your SM951 on an AMD board! I was worried, for certain reasons, that an SM951 would not work well on an AMD board. Is the SM951 and adapter card in a PCIe 3.0 slot? It seems to be. Your benchmark results are very good, with one exception, the 4K results are a bit low. That is just me as an SSD enthusiast judging every last thing, so forgive me for that. Questions: How did you format the SM951 when you installed Windows? Did you let the Windows installer program format it, or did you do it? What BIOS settings did you change for the SM951? AHCI or RAID mode? Any changes to CSM? If you can tell us how you did your Windows 10 installation, that would be useful information for other people! |
|||
|
|||
|
|||
|
net2paul
Newbie
Joined: 12 Aug 2015 Location: Romania Status: Offline Points: 26 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 Nov 2015 at 2:58am |
||
|
First of all you don't format or partitioning SM951 !!!!!
Asrock 990FX with the latest bios! U need to create a Windows 10 USB (GPT) installations media with UEFI support (GPT) Use RUFUS . Tutorial for RUFUS and Download http://www.windowscentral.com/how-create-windows-10-usb-installation In UEFI set AHCI and GPT. Mount SM951, No other drive. Boot directly from USB (GPT) with Win10 installer. Let Windows to configure your drive. In UEFI showing a new drive in BOOT menu something like "Windows Media". I'm not enter to UEFI right now but you will recognise it. Good luck ! Great thanks to Finnipinni !!!!
You post a benchmark results with 2 x SM951 in raid0. If you divide the results you will receive approximately the same results. But with intel board you use PCie 3 , not PCie 2 like AMD boards. Asrock 990FX M.2 PCie 2 x 2 With PCie slot nr 2 the Adapter can use PCie 2 x 4
Edited by net2paul - 18 Nov 2015 at 3:27am |
|||
|
|||
|
aberdeen
Newbie
Joined: 23 Oct 2015 Location: RO Status: Offline Points: 7 |
Post Options
Thanks(0)
Quote Reply
Posted: 08 Dec 2015 at 1:44am |
||
|
|||
|
|||
|
parsec
Moderator Group
Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
Post Options
Thanks(0)
Quote Reply
Posted: 08 Dec 2015 at 2:14pm |
||
I already posted this result in another post under my RAID 0 results. This is one SM951 on my Z97 board. Here it is again:  The other RAID 0 results show the RAID scaling is poor, either the RAID driver is holding these SSDs back or we've already used up the bandwidth. So dividing by two does not work for the new RAID for PCIe SSDs. It does work for SATA SSDs in general. net2paul, You are not understanding me, or I'm not understanding you, about formatting the SSD and using a USB flash drive to install Windows. When I install Windows on my SM951s or 950 Pro (or any SSD that I want to use the EFI bootloader for the Windows installation) using Intel chipset boards, I never format the SSD first. I always let the Windows installer program do that. When I tried the same technique on my 970 Performance board, it would not work. I've installed Windows like this for years on Intel boards, but the 970 Performance refused to work that way. Someone in an earlier post said they formatted the SSD as GPT before the Windows installation on an AMD chipset board. That worked for them. That's why I asked you what you did. You wrote this: "In UEFI set AHCI and GPT." AHCI is obvious, but how are you "setting GPT"? You also wrote: "Boot directly from USB (GPT) with Win10 installer. Let Windows to configure your drive. In UEFI showing a new drive in BOOT menu something like "Windows Media". "When you write GPT, I think you mean UEFI. The entry in the boot order will be "Windows Boot Manager". Never tried it again on my 970 Performance, but I will soon. |
|||
|
|
|||
|
|||
|
net2paul
Newbie
Joined: 12 Aug 2015 Location: Romania Status: Offline Points: 26 |
Post Options
Thanks(0)
Quote Reply
Posted: 09 Dec 2015 at 7:19am |
||
|
Next week I will build a new PC with 970 Performance and SM951.
So I will inform you step by step if I succeed !
|
|||
|
|||
|
net2paul
Newbie
Joined: 12 Aug 2015 Location: Romania Status: Offline Points: 26 |
Post Options
Thanks(0)
Quote Reply
Posted: 19 Dec 2015 at 3:49am |
||
|
So installing Win10 on SM951 AHCI vers. on 970 Performance board is the same as on Killer.
And Booting ! 1 No other drive just the SM951 2 Plug USB with GPT (not MasterBootRecord) USB with Win10 install created with Rufus 3 Go to UEFI Bios 4 Set in UEFI Bios on Storage configuration SATA MODE to AHCI MODE - everything disable, no AMD AHCI Bios . 4 Set Boot from USB UEFI 5 Boot and install Win10 6 On first restart unplug the USB 7 if Win10 installing go on next level , your are OK. That's all !!!
|
|||
|
|||
|
Xaltar
Moderator Group
Joined: 16 May 2015 Location: Europe Status: Offline Points: 25028 |
Post Options
Thanks(0)
Quote Reply
Posted: 19 Dec 2015 at 5:35am |
||
|
Thanks for the info Net2Paul
|
|||
|
|||
|
Post Reply
|
Page <1 345 |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
net2paul wrote:
