ASRock.com Homepage
Forum Home Forum Home > Technical Support > Intel Motherboards
  New Posts New Posts RSS Feed - Z890 Pacakge C-states deeper than C2£
  FAQ FAQ  Forum Search Search  Events   Register Register  Login Login

Z890 Pacakge C-states deeper than C2£

 Post Reply Post Reply
Author
Message
Yump View Drop Down
Newbie
Newbie
Avatar

Joined: 21 Dec 2024
Status: Offline
Points: 20
Post Options Post Options   Thanks (0) Thanks(0)   Quote Yump Quote  Post ReplyReply Direct Link To This Post Topic: Z890 Pacakge C-states deeper than C2£
    Posted: 13 hours 28 minutes ago at 11:08am
The below was copied from the support request form, 30 minutes after the expected automated email failed to arrive:

Hardware:

Board: ASRock Z890 Pro-A Wifi
CPU: Intel Core Ultra 7 265K
RAM: Crucial cp2k24g60c48u5 2x24 6000C48 @1.1V
Disk: 120 GB Inland Professional SSD
PSU: Antec Neo Eco 620C PSU

What BIOS option(s) do I need to set to allow the CPU to enter deep idle?

Turbostat reports that package sleep states deeper than the shallowest C2 are never used, and also, "MSR_PKG_CST_CONFIG_CONTROL: 0x00008002 (locked, pkg-cstate-limit=2 (pc3))", which is certainly suggestive. As far as I can tell, this platform is supposed to support also C3, C6, C8, and C10.

I've tried a bunch of different options that seem power-saving-related: all the ASPM and ALPM BIOS option set to least-power, "power floor management" in the CPU OC options set to Disabled, and nothing plugged in but a single SATA SSD. Nothing I can find changes that limit or results in any package c-state residency below C2.

The only thing that moves the wall power at all from 29 W is System Agent Geyserville, but that also underclocked the RAM to 5600, and it only shaves 3W. I understand that older, non-resonant-LLC PSUs can be less efficient at low load, but the package power is also 8 W (higher than my old Haswell) and the chipset heatsink stays noticeably warm.

I even tried Windows, which is actually a little worse, at 30 W from the wall.

Please help. I have seen posts on Reddit and AskUbuntu from people having similar problems with older chipsets, using an AMISCE Windows utility to change unexposed BIOS settings. But, I don't want to risk a bricking, and even if that worked I wouldn't want to have to do it again every time there's a BIOS update.

My preferred outcome is that the setting that people are modding with AMISCE become available in the public BIOS release, so that less "enthusiastic" owners can benefit. I've spent way more time chasing this down than the electricity would cost already, and I'd like the result to be multiplied.
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.04
Copyright ©2001-2021 Web Wiz Ltd.

This page was generated in 0.063 seconds.