ASRock.com Homepage
Forum Home Forum Home > Technical Support > AMD Motherboards
  New Posts New Posts RSS Feed - Ryzen 7 1700 stuck at 1.5GHz on default settings
  FAQ FAQ  Forum Search Search  Events   Register Register  Login Login

Ryzen 7 1700 stuck at 1.5GHz on default settings
 Post Reply Post Reply Page  <12
Author
Message
  Topic Search Topic Search  Topic Options Topic Options
wardog View Drop Down
Moderator Group
Moderator Group


Joined: 15 Jul 2015
Status: Offline
Points: 6447 		Post Options Post Options   Thanks (0) Thanks(0)   Quote wardog Quote  Post ReplyReply Direct Link To This Post Posted: 20 Sep 2017 at 9:05am
Originally posted by ryzen_from_the_dead ryzen_from_the_dead wrote:

There was also a tiny bit of thermal paste spillage potentially reaching one pin, but I guess it's more likely that the ASRock motherboard was faulty.


Na. The ASRock MB is/was most likely good still, depending on if anything shorted out by the TIM connecting a processor pin.
Back to Top
parsec View Drop Down
Moderator Group
Moderator Group
Avatar

Joined: 04 May 2015
Location: USA
Status: Offline
Points: 4996 		Post Options Post Options   Thanks (0) Thanks(0)   Quote parsec Quote  Post ReplyReply Direct Link To This Post Posted: 20 Sep 2017 at 9:38am
Originally posted by ryzen_from_the_dead ryzen_from_the_dead wrote:

Thanks everyone for the help!

I haven't been online since I tore down the computer to try to fix it. I grabbed the fastest to get Micro-ATX AM4 motherboard I could find (ASUS PRIME B350M-A) and switched to that. There was also a tiny bit of thermal paste spillage potentially reaching one pin, but I guess it's more likely that the ASRock motherboard was faulty.

Anyway after getting the build running again it reached 3.0GHz and the benchmarks match the baseline!

CPU-Z benchmark at reference


As predicted above, TIM on a CPU pin. Not one other post about a Ryzen CPU running at 1/2 it's rated clock speed in the forum. I've never seen my Ryzen 1700X at 1.5GHz with C6 enabled.

But of course, it was the board... Pinch

How do mother board manufactures stay in business? Confused
Back to Top
brucer View Drop Down
Newbie
Newbie


Joined: 17 Sep 2017
Location: ky
Status: Offline
Points: 144 		Post Options Post Options   Thanks (0) Thanks(0)   Quote brucer Quote  Post ReplyReply Direct Link To This Post Posted: 20 Sep 2017 at 9:42am
I had the exact same issue with a Fatality X370 Professional Gaming...  its likely the way you set the vcore voltage, at least that is what it was for me.. When i set my vcore voltage in both locations (top and down towards the bottom) I got the same as you were getting, like 1550mhz.... 

When I overclocked using the p-states it worked fine..

After overclocking with the p-states,  I went back and set my overclock the conventional way one would overclock...  I used the top frequency and top vcore setting only and it worked fine..  I used 1.350 vcore, the voltage setting on down the page was set to auto but I changed the cpu llc to level4..  It worked as intended...

 I'm running a stable 3.9ghz at 1.35 to 1.376 volts..

 I think i'm going to go back to the p-state overclock though.. I like that better because of the down clock, seems like it used a bit less voltage also..


Edited by brucer - 21 Sep 2017 at 6:22am
Asrock x570 Taichi, Ryzen3800x, 32gb Gskill Royal 36000mhz@ 3733mhz, Samsung 250gb 970evo plus for OS drive, Sabrent Rocket 1tb nvme storage drive.
Back to Top
 Post Reply Post Reply Page  <12
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.04
Copyright ©2001-2021 Web Wiz Ltd.

This page was generated in 0.078 seconds.