DeskMini 110/310 + Noctua L9i ==> bendability

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I am a very happy owner of a DeskMini 110. I run it maxed out with a i7-7700T, Noctua L9i, 32GB Ram and 1TB M2 SSD. It is completely silent, powerful and simply awesome. I was waiting for the update, the 310, however early incoming reports are mixed.

For example, this one https://www.youtube.com/watch?v=mDnXeeHtM-E reports (at about minute 3:40+) that the new 310 still has the same problem as the 110 had with the Noctua cooler, if you tighten the cooler too much you destroy the mainboard.

I can confirm this from my own 110 experience, the Noctua L9i is THE alternative to the Intel stock cooler if one wants a silent system, however tightening the cooler screws the mainboard is dangerously bent.

:-(

I wanted another 310 as soon as its available, that I can carry around in my backpack, but if this mainboard bending problem still exists I'm obviously hesitant, because the mechanical carrying around stress on the 310 in a backpack will sooner or later break it.

Dear Asrock, will you do something about this? The model is just starting to enter the market, the time to fix things is now. Perhaps you and Noctua can work together to make the Noctua L9i an official recommended option and one of you provides a solution for improved stiffness?
This would be awesome....

Thank you!

PS: And looking forward to an AMD based model, too :-)

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
aforumuser Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 25 May 2017 Status: Offline Points: 175	Post Options Post Reply Quote aforumuser Report Post Thanks(0) Quote Reply Topic: DeskMini 110/310 + Noctua L9i ==> bendability Posted: 17 Jun 2018 at 5:26pm
	I am a very happy owner of a DeskMini 110. I run it maxed out with a i7-7700T, Noctua L9i, 32GB Ram and 1TB M2 SSD. It is completely silent, powerful and simply awesome. I was waiting for the update, the 310, however early incoming reports are mixed. For example, this one https://www.youtube.com/watch?v=mDnXeeHtM-E reports (at about minute 3:40+) that the new 310 still has the same problem as the 110 had with the Noctua cooler, if you tighten the cooler too much you destroy the mainboard. I can confirm this from my own 110 experience, the Noctua L9i is THE alternative to the Intel stock cooler if one wants a silent system, however tightening the cooler screws the mainboard is dangerously bent. :-( I wanted another 310 as soon as its available, that I can carry around in my backpack, but if this mainboard bending problem still exists I'm obviously hesitant, because the mechanical carrying around stress on the 310 in a backpack will sooner or later break it. Dear Asrock, will you do something about this? The model is just starting to enter the market, the time to fix things is now. Perhaps you and Noctua can work together to make the Noctua L9i an official recommended option and one of you provides a solution for improved stiffness? This would be awesome.... Thank you! PS: And looking forward to an AMD based model, too :-)