ASrock Z68 Extreme3 Gen3 won't boot after update

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi guys,I recently updated my Asrock Z68 Extreme3 Gen3 to the newest beta BIOS (L.2.31A: https://www.asrock.com/mb/Intel/Z68%20Extreme3%20Gen3/index.asp#BIOS) to enable Fast booting in windows 10. The update itself succeeded without an issue and Instant Flash asked me to press any key after the update has finished to reboot, which I did.
Sadly my PC wont start since then :/ The mainboard doesn't POST and won't display anything. The onboard LED showed code 95 for a few seconds and then it started displaying 10 and 08, rapidly switching between the two numbers (0.1s or so).
I did a CMOS reset with the same result. Then I removed everything (only CPU, one RAM and necessary cables were connected) and did a CMOS reset again, still with the same result.

Is there any chance the board isn't bricked?

System:
Mainboard: Asrock Z68 Extreme3 Gen3
CPU: Intel Core i5 2400
Memory: 4x 2GB Corsair Vengeance 1600Mhz (9-9-9-24)
GPU (PCIe): XFX HD6870 (1GB)
Soundcard (PCI): Creative Soundblaster Platinum

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Penny_xP Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 17 May 2018 Status: Offline Points: 3	Post Options Post Reply Quote Penny_xP Report Post Thanks(0) Quote Reply Topic: ASrock Z68 Extreme3 Gen3 won't boot after update Posted: 17 May 2018 at 2:18am
	Hi guys, I recently updated my Asrock Z68 Extreme3 Gen3 to the newest beta BIOS (L.2.31A: https://www.asrock.com/mb/Intel/Z68%20Extreme3%20Gen3/index.asp#BIOS) to enable Fast booting in windows 10. The update itself succeeded without an issue and Instant Flash asked me to press any key after the update has finished to reboot, which I did. Sadly my PC wont start since then :/ The mainboard doesn't POST and won't display anything. The onboard LED showed code 95 for a few seconds and then it started displaying 10 and 08, rapidly switching between the two numbers (0.1s or so). I did a CMOS reset with the same result. Then I removed everything (only CPU, one RAM and necessary cables were connected) and did a CMOS reset again, still with the same result. Is there any chance the board isn't bricked? System: Mainboard: Asrock Z68 Extreme3 Gen3 CPU: Intel Core i5 2400 Memory: 4x 2GB Corsair Vengeance 1600Mhz (9-9-9-24) GPU (PCIe): XFX HD6870 (1GB) Soundcard (PCI): Creative Soundblaster Platinum

Bronobo Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 12 Sep 2018 Status: Offline Points: 2	Post Options Post Reply Quote Bronobo Report Post Thanks(0) Quote Reply Posted: 12 Sep 2018 at 9:32am
	Dealing with this as well, did you ever find a solution? Searching google indicates I have to buy a new bios chip with 1.30.

Bronobo Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 12 Sep 2018 Status: Offline Points: 2	Post Options Post Reply Quote Bronobo Report Post Thanks(0) Quote Reply Posted: 18 Sep 2018 at 6:58am
	Update: Requested v1.30 bios chip from ASRock online support, took 2 days for them to put it together and they shipped it for free! All is well after switching the chips.

Mbout2 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: Yesterday Location: CANADA Status: Offline Points: 15	Post Options Post Reply Quote Mbout2 Report Post Thanks(0) Quote Reply Posted: Yesterday at 5:02pm
	Update, I have the EXACT SAME PROBLEM. Where I get that chip please :)