My motherboard (ASRock X670E Steel Legend) won£�t b

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I am trying to start my x670E Steel Legend for the first time, cpu, 2 sticks of memory (in B2 and A2 position), gpu and power supply. The problem is that the Post status checker for CPU is glowing as soon as I boot on the PC. I don't get any video feedback either from onboard or pcie video card. Any ideas? I tried 2x4 pin and 2 8pin pin cpu connectors. I already tried to reset CMOS and it didn?�t help. Also tried switching the 2x4 pins from ATX12V1 to ATX12V2. 

CPU: Ryzen 7 9700x

Motherboard: X670E Steel Legend

Ram: Corsair RAM 64GB Kit (2x32GB) DDR5 6200MHz

OS: None yet installed

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
pukanec Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 29 Dec 2024 Status: Offline Points: 20	Post Options Post Reply Quote pukanec Report Post Thanks(0) Quote Reply Topic: My motherboard (ASRock X670E Steel Legend) won£�t b Posted: 29 Dec 2024 at 7:54am
	I am trying to start my x670E Steel Legend for the first time, cpu, 2 sticks of memory (in B2 and A2 position), gpu and power supply. The problem is that the Post status checker for CPU is glowing as soon as I boot on the PC. I don't get any video feedback either from onboard or pcie video card. Any ideas? I tried 2x4 pin and 2 8pin pin cpu connectors. I already tried to reset CMOS and it didn?�t help. Also tried switching the 2x4 pins from ATX12V1 to ATX12V2. CPU: Ryzen 7 9700x Motherboard: X670E Steel Legend Ram: Corsair RAM 64GB Kit (2x32GB) DDR5 6200MHz OS: None yet installed

cpanazio Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 10 hours 15 minutes ago Location: Brazil Status: Offline Points: 30	Post Options Post Reply Quote cpanazio Report Post Thanks(0) Quote Reply Posted: 6 hours 3 minutes ago at 9:14am
	Have you tried to remove the 2 memory sticks and plug them again? I had a similar issue (no video at all) and the CPU and RAM diagnostic LEDs on the motherboard (also a X670E Steel Legend) were permanently on, indicating an error. I have waited several minutes to see if it was due to the memory training, but noting has changed. Then, I have also, like you, tried to reset the CMOS, but it did not work. Finally, I removed and reinserted both RAM sticks, which made the trick: no more diagnostic LEDs on, got video and the post screen.