![]() |
GTX 1070 not working on A320m DGS |
Post Reply ![]() |
Page <12 |
Author | |
Xaltar ![]() Moderator Group ![]() ![]() Joined: 16 May 2015 Location: Europe Status: Offline Points: 25708 |
![]() ![]() ![]() ![]() ![]() |
Try a different PSU, preferably one with a single 12v rail. I didn't even notice
that you are using a BeQuiet low wattage unit (sub 700w). That thing is only 500w and splits that 500w over more than one rail which means the GPU is probably not getting enough power from that single 8 pin. It literally can only provide 18a per rail which means it basically can only provide 200w per rail. Not good enough for a 1070. The board with the 8pin power is likely as you suspected providing a bit more power through the PCIe slot but the single 8pin on the GPU should be enough to run the card if it's getting enough amps and the board is providing it's required 75w (which is the spec so it should be). |
|
![]() |
|
![]() |
|
MadManMuhamed1 ![]() Newbie ![]() Joined: 11 Mar 2020 Status: Offline Points: 9 |
![]() ![]() ![]() ![]() ![]() |
I'm gonna try that too and podt the results here, but right now I am using my friends motherboard and it's working perfectly with the same PSU. Will try to get one and try soon.
|
|
![]() |
Post Reply ![]() |
Page <12 |
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |