mm@desktop ~
> cat /etc/modules-load.d/20_nct6775.conf
------------------------------------------------------------------------
File: /etc/modules-load.d/20_nct6775.conf
-------------------------------------------------------------------------
nct6775
--------------------------------------------------------------------------
mm@desktop ~
> sensors
spd5118-i2c-6-50
Adapter: SMBus PIIX4 adapter port 0 at 0b00
temp1: +35.5°C (low = +0.0°C, high = +55.0°C)
(crit low = +0.0°C, crit = +85.0°C)
nct6799-isa-0290
Adapter: ISA adapter
in0: 1.03 V (min = +0.00 V, max = +1.74 V)
in1: 1.85 V (min = +0.00 V, max = +0.00 V) ALARM
in2: 3.42 V (min = +0.00 V, max = +0.00 V) ALARM
in3: 3.33 V (min = +0.00 V, max = +0.00 V) ALARM
in4: 1.66 V (min = +0.00 V, max = +0.00 V) ALARM
in5: 1.06 V (min = +0.00 V, max = +0.00 V)
in6: 1.18 V (min = +0.00 V, max = +0.00 V) ALARM
in7: 3.42 V (min = +0.00 V, max = +0.00 V) ALARM
in8: 3.30 V (min = +0.00 V, max = +0.00 V) ALARM
in9: 1.79 V (min = +0.00 V, max = +0.00 V) ALARM
in10: 1.22 V (min = +0.00 V, max = +0.00 V) ALARM
in11: 1.12 V (min = +0.00 V, max = +0.00 V) ALARM
in12: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM
in13: 896.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in14: 1.21 V (min = +0.00 V, max = +0.00 V) ALARM
in15: 752.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in16: 1.81 V (min = +0.00 V, max = +0.00 V) ALARM
in17: 248.00 mV (min = +0.00 V, max = +0.00 V)
fan1: 0 RPM (min = 0 RPM)
fan2: 761 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 531 RPM (min = 0 RPM)
fan5: 428 RPM (min = 0 RPM)
fan7: 492 RPM (min = 0 RPM)
SYSTIN: +39.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +127.0°C) sensor = thermistor
CPUTIN: +36.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +80.0°C) sensor = thermistor
AUXTIN0: +16.0°C (high = +127.0°C, hyst = +110.0°C)
(crit = +0.0°C) sensor = thermistor
AUXTIN1: +15.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +80.0°C) sensor = thermistor
AUXTIN2: +19.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +80.0°C) sensor = thermistor
AUXTIN3: +15.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +100.0°C) sensor = thermistor
SMBUSMASTER 0: +46.5°C (high = +80.0°C, hyst = +75.0°C)
AUXTIN4: +23.0°C (high = +80.0°C, hyst = +75.0°C)
(crit = +80.0°C)
AUXTIN5: +99.0°C
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
TSI0_TEMP: +46.6°C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled
nvme-pci-0f00
Adapter: PCI adapter
Composite: +38.9°C (low = -20.1°C, high = +83.8°C)
(crit = +88.8°C)
Sensor 2: +76.8°C
k10temp-pci-00c3
Adapter: PCI adapter
Tctl: +46.6°C
Tccd1: +37.0°C
nvme-pci-0200
Adapter: PCI adapter
Composite: +39.9°C (low = -0.1°C, high = +82.8°C)
(crit = +89.8°C)
mm@desktop ~
> fan2go detect
> spd5118
Sensors Index Label Value
1 hwmon4/temp1 (temp1_input) 35500
> nct6799-isa-0290
Fans Index Channel Label RPM PWM Auto
1 1 hwmon2/fan1 0 77 false
2 2 hwmon2/fan2 758 81 false
3 3 hwmon2/fan3 0 0 true
4 4 hwmon2/fan4 532 67 true
5 5 hwmon2/fan5 428 67 true
6 7 hwmon2/fan7 492 67 true
Sensors Index Label Value
1 SYSTIN (temp1_input) 39000
2 CPUTIN (temp2_input) 36000
3 AUXTIN0 (temp3_input) 16000
4 AUXTIN1 (temp4_input) 15000
5 AUXTIN2 (temp5_input) 19000
6 AUXTIN3 (temp6_input) 15000
7 SMBUSMASTER 0 (temp7_input) 46500
8 AUXTIN4 (temp8_input) 23000
9 AUXTIN5 (temp9_input) 99000
10 PCH_CHIP_CPU_MAX_TEMP (temp10_input) 0
11 PCH_CHIP_TEMP (temp11_input) 0
12 PCH_CPU_TEMP (temp12_input) 0
13 TSI0_TEMP (temp13_input) 46625
> nvme-pci-0f00
Sensors Index Label Value
1 Composite (temp1_input) 38850
2 Sensor 2 (temp3_input) 76850
> k10temp-pci-00c3
Sensors Index Label Value
1 Tctl (temp1_input) 46625
2 Tccd1 (temp3_input) 37500
> nvme-pci-0200
Sensors Index Label Value
1 Composite (temp1_input) 39850
mm@desktop ~
>
|
Post Options
Thanks(0)
Quote 
Topic: How to measure a CPU temperature on Linux OS
Tweet
Topic Options