ASRock B650M & 64GB Trident Z5 - BSOD

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello,

I've recently upgraded my setup from Lexar 32GB (2x16GB) 6000MHz CL30 Ares RGB to G.Skill Trident Z5 Neo RGB, DDR5, 64 GB.

Before on 32GB RAM PC was running very stable for a year, not a single BSOD or any issue.
Once I've replaced RAM and enabling EXPO mode I'm having very often BSOD "PAGE_FAULT_IN_NONPAGED_AREA".

Without EXPO Mode it runs stable, several days without BSOD. But the performance is HORRIBLE and very much visible in for ex. Diablo 4, basically can't play and watch youtube at the same time on two different monitors. With EXPO enabled it runs perfectly smooth but game crashes or having BSOD :)

Components -

AMD Ryzen 5 7600
ASRock B650M PG RIPTIDE
G.Skill Trident Z5 Neo RGB, DDR5, 64 GB, 6000MHz, CL30 (F5-6000J3040G32GX2-TZ5NR)
SAPPHIRE RX 7800 XT NITRO+ GAMING OC 16GB
Kingston KC3000 1TB M.2 2280 PCI-E x4 Gen4 NVMe
Endorfy Fortis 5 Dual Fan
be quiet! Pure Power 12 M 750W 80 Plus Gold ATX 3.0

To avoid questions why do I switched to 64GB? Apart from playing games I also run VM's on that PC that have huge memory requirements (HANA Database). To be honest when I was running VM and the usage of RAM was 100% constantly for several hours I did not experience any issues or BSOD. It seems to happen only while playing a games.

I've did some tests, seems that once I've switch on EXPO from DRAM Frequency 6000 (EXPO DEFAULT) to 5800 then it seems to be stable.

Attached below 4 test cases.
Each of the test case contains -

1. ZenTimings
2. Memory benchmark test with OCCT
3. Memory timings 

Test 1 -
EXPO Disabled (Stock Configuration)
No errors at all
https://imgur.com/a/IbcdfUZ

Test 2 - 
EXPO Enabled (Default EXPO Configuration)
Visible errors in benchmark tests
https://imgur.com/a/5qulsIn

Test 3 - 
EXPO Enabled (Changed DRAM Frequency to 5600)
No errors at all
https://imgur.com/a/4ZswgJn

Test 4 -
EXPO Enabled (Changed DRAM Frequency to 5800)
No errors at all
https://imgur.com/a/AJTvfbN

Bios Parameters - (Comments below pictures)
https://imgur.com/a/E23ArML

I'm looking for a way how to optimize these things so they run in most efficient way :)

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
dens666 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 5 hours 47 minutes ago Status: Offline Points: 20	Post Options Post Reply Quote dens666 Report Post Thanks(0) Quote Reply Topic: ASRock B650M & 64GB Trident Z5 - BSOD Posted: 4 hours 30 minutes ago at 2:33am
	Hello, I've recently upgraded my setup from Lexar 32GB (2x16GB) 6000MHz CL30 Ares RGB to G.Skill Trident Z5 Neo RGB, DDR5, 64 GB. Before on 32GB RAM PC was running very stable for a year, not a single BSOD or any issue. Once I've replaced RAM and enabling EXPO mode I'm having very often BSOD "PAGE_FAULT_IN_NONPAGED_AREA". Without EXPO Mode it runs stable, several days without BSOD. But the performance is HORRIBLE and very much visible in for ex. Diablo 4, basically can't play and watch youtube at the same time on two different monitors. With EXPO enabled it runs perfectly smooth but game crashes or having BSOD :) Components - AMD Ryzen 5 7600 ASRock B650M PG RIPTIDE G.Skill Trident Z5 Neo RGB, DDR5, 64 GB, 6000MHz, CL30 (F5-6000J3040G32GX2-TZ5NR) SAPPHIRE RX 7800 XT NITRO+ GAMING OC 16GB Kingston KC3000 1TB M.2 2280 PCI-E x4 Gen4 NVMe Endorfy Fortis 5 Dual Fan be quiet! Pure Power 12 M 750W 80 Plus Gold ATX 3.0 To avoid questions why do I switched to 64GB? Apart from playing games I also run VM's on that PC that have huge memory requirements (HANA Database). To be honest when I was running VM and the usage of RAM was 100% constantly for several hours I did not experience any issues or BSOD. It seems to happen only while playing a games. I've did some tests, seems that once I've switch on EXPO from DRAM Frequency 6000 (EXPO DEFAULT) to 5800 then it seems to be stable. Attached below 4 test cases. Each of the test case contains - 1. ZenTimings 2. Memory benchmark test with OCCT 3. Memory timings Test 1 - EXPO Disabled (Stock Configuration) No errors at all https://imgur.com/a/IbcdfUZ Test 2 - EXPO Enabled (Default EXPO Configuration) Visible errors in benchmark tests https://imgur.com/a/5qulsIn Test 3 - EXPO Enabled (Changed DRAM Frequency to 5600) No errors at all https://imgur.com/a/4ZswgJn Test 4 - EXPO Enabled (Changed DRAM Frequency to 5800) No errors at all https://imgur.com/a/AJTvfbN Bios Parameters - (Comments below pictures) https://imgur.com/a/E23ArML I'm looking for a way how to optimize these things so they run in most efficient way :)