New build, no signal to monitor. Please halppp!

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi everybody, hope you are all having a fantastic Monday! 
I made a new build for rendering and editing and it is as follows:

ASRock X370 Pro4
Ryzen 7 2700 with EVGA CLC120 liquid cooler
Corsair Vengeance RAM [1x16gb]
Asus gtx 1050ti 4GB
600W PSU
Sandisk 480GB SSD
Random 500 GB HDD I had lying around

The problem that I'm having is that there is no output signal to the monitor. I made sure the RAM is plugged into the correct [A2] slot, the monitor is plugged into the GPU, not the MoBo. I've checked all the basics but it doesn't seem to be any of those problems. 

The PC fires right up, all LED's and fans going, but no signal to the monitor. Ack!

Am I missing something stupid/random?

Any and all advice/help is much appreciated!!

Thanks! 

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Brian.Ferry Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 24 Jul 2018 Status: Offline Points: 3	Post Options Post Reply Quote Brian.Ferry Report Post Thanks(0) Quote Reply Topic: New build, no signal to monitor. Please halppp! Posted: 24 Jul 2018 at 6:00am
	Hi everybody, hope you are all having a fantastic Monday! I made a new build for rendering and editing and it is as follows: ASRock X370 Pro4 Ryzen 7 2700 with EVGA CLC120 liquid cooler Corsair Vengeance RAM [1x16gb] Asus gtx 1050ti 4GB 600W PSU Sandisk 480GB SSD Random 500 GB HDD I had lying around The problem that I'm having is that there is no output signal to the monitor. I made sure the RAM is plugged into the correct [A2] slot, the monitor is plugged into the GPU, not the MoBo. I've checked all the basics but it doesn't seem to be any of those problems. The PC fires right up, all LED's and fans going, but no signal to the monitor. Ack! Am I missing something stupid/random? Any and all advice/help is much appreciated!! Thanks!

datonyb Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 11 Apr 2017 Location: London U.K. Status: Offline Points: 3154	Post Options Post Reply Quote datonyb Report Post Thanks(0) Quote Reply Posted: 25 Jul 2018 at 1:30am
	check 24 pin power to board is full6y inserted check 8 pin cpu/eps power lead to board IS ACTUALLY THE cpu/eps cable from psu and not a pcie graphics (yes it happens a lot) finally pull the ram stick out and then reinsert it (it takes much more pessure than you think it does to seat fully and hear a clear click with either end tab locking it in place) disconnect the hard drives/ssds and test for boot finally if still no joy check the sticker on the bios chip (middle of board) it should read version 4.xx or higher as your cpu 2700 requires an updated bios to be used in a x370 board if the sticker reads 1.6 > 3.30 or anything inbetween it wont boot with any ryzen 2xxx cpu
	[url=https://valid.x86.fr/jpg250][/url] 3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold