X470 Taich - Black screen and OC question

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I cleared CMOS, still black screen ~10sec. I want to increase voltage now but I'm not sure how to do. I have 2 options:
1. Put CPU freq and voltage in manual mode and change there
(If I just put on manual, then CPU will not OC itself anymore?)
2. Go in Voltage configuration, under CPU Vcore change from auto to fixed or offset

Should I choose number 2, go fixed and write 1.3?
I tried looking in mbo manaul but it's not described in detail.. noting about fixed or offset modes is mentioned.

Edited by juuhuu - 19 May 2018 at 9:26am

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
juuhuu Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 18 May 2018 Status: Offline Points: 15	Post Options Post Reply Quote juuhuu Report Post Thanks(0) Quote Reply Posted: 19 May 2018 at 9:25am
	I cleared CMOS, still black screen ~10sec. I want to increase voltage now but I'm not sure how to do. I have 2 options: 1. Put CPU freq and voltage in manual mode and change there (If I just put on manual, then CPU will not OC itself anymore?) 2. Go in Voltage configuration, under CPU Vcore change from auto to fixed or offset Should I choose number 2, go fixed and write 1.3? I tried looking in mbo manaul but it's not described in detail.. noting about fixed or offset modes is mentioned. Edited by juuhuu - 19 May 2018 at 9:26am

datonyb Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 11 Apr 2017 Location: London U.K. Status: Offline Points: 3154	Post Options Post Reply Quote datonyb Report Post Thanks(0) Quote Reply Posted: 19 May 2018 at 6:43pm
	mate can i say again many many very experianced ryzen system builders are saying dont bother overclocking the cpu why are you messing around with yours ? amd seem to have a very very good job with the auto clocks,
	[url=https://valid.x86.fr/jpg250][/url] 3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold

juuhuu Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 18 May 2018 Status: Offline Points: 15	Post Options Post Reply Quote juuhuu Report Post Thanks(0) Quote Reply Posted: 20 May 2018 at 2:02am
	I am not trying to overclock, I am just trying to put voltage up because user "donalgodon" said that black screen might be because of too low voltage. I have put 1.3V under fixed and same.. black screen.

juuhuu Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 18 May 2018 Status: Offline Points: 15	Post Options Post Reply Quote juuhuu Report Post Thanks(0) Quote Reply Posted: 20 May 2018 at 2:54am
	Tried puttin VGA in bottom slot and running with just 1 memory stick but same.. Is this normal when I power on? https://youtu.be/xqg2Uu8dfRw Edited by juuhuu - 20 May 2018 at 2:55am

Xaltar Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 26933	Post Options Post Reply Quote Xaltar Report Post Thanks(0) Quote Reply Posted: 20 May 2018 at 3:04am
	Yes, that is normal. You only have an issue if a code remains on the debug display and the system has stopped responding/posting. The POST code display shows the code for each part of the POST process, if the system fails at any one of these Power On Self Tests, the corresponding code will remain on the display to let you know where the problem is, otherwise they simply flash on the display and change to the next code until POST is complete. There is also a POST code that is displayed while in the UEFI, this is normal too, this is because entering the UEFI interrupts the POST process.


juuhuu Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 18 May 2018 Status: Offline Points: 15	Post Options Post Reply Quote juuhuu Report Post Thanks(0) Quote Reply Posted: 20 May 2018 at 4:56am
	Is 10-15sec black screen before Asrock logo/BIOS/boot menu also normal? What about reseting everything by removing battery? Edited by juuhuu - 20 May 2018 at 7:24am