P43 Twins - Bios request in bin or hex format

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Sorry my english translated by google
I have a P43Twins mainboard
I probably ruined the bios after a flash and would like to reprogram the chip with a usb programmer
It reads the chip correctly but I don't have a bios file in bin or hex format
From the Asrock site I can only download the dos or windows executables but I cannot extract the bios in the necessary format.
Any suggestions or links to download the necessary file
Even a previous version, then I update with the latest release

Thanks in advance
Hello
:)

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Navigatorx Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 19 Sep 2020 Status: Offline Points: 4	Post Options Post Reply Quote Navigatorx Report Post Thanks(0) Quote Reply Topic: P43 Twins - Bios request in bin or hex format Posted: 19 Sep 2020 at 6:54pm
	Sorry my english translated by google I have a P43Twins mainboard I probably ruined the bios after a flash and would like to reprogram the chip with a usb programmer It reads the chip correctly but I don't have a bios file in bin or hex format From the Asrock site I can only download the dos or windows executables but I cannot extract the bios in the necessary format. Any suggestions or links to download the necessary file Even a previous version, then I update with the latest release Thanks in advance Hello :)

Navigatorx Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 19 Sep 2020 Status: Offline Points: 4	Post Options Post Reply Quote Navigatorx Report Post Thanks(0) Quote Reply Posted: 20 Sep 2020 at 9:38pm
	PROBLEM SOLVED - But I fear another failure I answer myself, maybe it can be useful for someone: I extracted the bios using the AMI utility (AMIUCP RELEASE 1.05) which reads the executable file and allows you to choose to extract a component, in this case the .rom part) Flashed with the usb programmer and the ch341a software I was able to reprogram the correct MAC ADDRESS with an Asrock MAC TOOL utility. However, I had to use version 1.17, the only one that worked for the integrated network card in my model Any other release did not allow this. Even the latest version ... Too bad that the pc that I turned off last night after having tested it thoroughly today shows no signs of life .... Maybe the mainboard is really leaving me Hello