No monitor signal in ASRock H81 Pro BTC

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi, 

My PC specs:

Processor: Pentium G3258
Motherboard: ASRock H81 Pro BTC
RAM: SK Hynix 4GB x 2
GPU: Radeon RX 460

Since long time, there were issues with power on after a power cut. Few weeks ago, CPU chassis' front panel's headphone socket stopped producing sound in one side, so today evening I decided to open up the chassis and resolve both these issues. First thing I  did was replace the CMOS battery, then put the jumper on clear position and tried to turn on, nothing happened, I put the jumper back in normal position, it turned on but I didn't any monitor signal, I fiddled with CMOS jumper and battery few times and I got the monitor signal, got into the UEFI, but there I was being shown that only one RAM was installed. So again I disconnected the power, took out the RAM and reinstalled it. But since the I'm not getting any monitor signal, it turns on for few minutes and restarts. So far I tried removing the CMOS battery, placing the jumper on clear, and leaving it for 10 minutes. But nothing happened. Tried it for 2 and half hours without success. Now I'm leaving it without CMOS battery and the jumper on clear position for 4 hours, as was suggested in one the threads here.

Can anyone help? Thanks 

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
budgetgamer Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 09 Mar 2018 Status: Offline Points: 3	Post Options Post Reply Quote budgetgamer Report Post Thanks(0) Quote Reply Topic: No monitor signal in ASRock H81 Pro BTC Posted: 09 Mar 2018 at 1:35am
	Hi, My PC specs: Processor: Pentium G3258 Motherboard: ASRock H81 Pro BTC RAM: SK Hynix 4GB x 2 GPU: Radeon RX 460 Since long time, there were issues with power on after a power cut. Few weeks ago, CPU chassis' front panel's headphone socket stopped producing sound in one side, so today evening I decided to open up the chassis and resolve both these issues. First thing I did was replace the CMOS battery, then put the jumper on clear position and tried to turn on, nothing happened, I put the jumper back in normal position, it turned on but I didn't any monitor signal, I fiddled with CMOS jumper and battery few times and I got the monitor signal, got into the UEFI, but there I was being shown that only one RAM was installed. So again I disconnected the power, took out the RAM and reinstalled it. But since the I'm not getting any monitor signal, it turns on for few minutes and restarts. So far I tried removing the CMOS battery, placing the jumper on clear, and leaving it for 10 minutes. But nothing happened. Tried it for 2 and half hours without success. Now I'm leaving it without CMOS battery and the jumper on clear position for 4 hours, as was suggested in one the threads here. Can anyone help? Thanks