X570 Taichi not detecting NVMe SSD

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I'm trying to build a system around the X570 Taichi with a Sabrent Rocket NVMe PCIe M2. 2280 SSD. I have updated the bios to P2.10 however the SSD is never detected in the BIOS. 

I have tried installing the SSD in the M2_1, M2_2 and M2_3 slots without it ever being detected. Fearing the board was the problem, I pulled the M.2 drive out of an old Dell E5570 laptop I have. The drive is a Sandisk 512Gb M.2 and the BIOS detected this drive in the M2_1 slot. 

So am I just needing to send the Sabrent back or is there some way of getting this drive detected. 

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Sp0rkchop Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 29 Sep 2019 Location: Arlington, TX Status: Offline Points: 3	Post Options Post Reply Quote Sp0rkchop Report Post Thanks(0) Quote Reply Topic: X570 Taichi not detecting NVMe SSD Posted: 29 Sep 2019 at 2:47pm
	I'm trying to build a system around the X570 Taichi with a Sabrent Rocket NVMe PCIe M2. 2280 SSD. I have updated the bios to P2.10 however the SSD is never detected in the BIOS. I have tried installing the SSD in the M2_1, M2_2 and M2_3 slots without it ever being detected. Fearing the board was the problem, I pulled the M.2 drive out of an old Dell E5570 laptop I have. The drive is a Sandisk 512Gb M.2 and the BIOS detected this drive in the M2_1 slot. So am I just needing to send the Sabrent back or is there some way of getting this drive detected.
	-sp0rkchop

Lumache Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 26 Jul 2019 Location: Castle Rock Status: Offline Points: 1	Post Options Post Reply Quote Lumache Report Post Thanks(0) Quote Reply Posted: 29 Nov 2019 at 9:35pm
	I am going to be installing one this morning so I will let you know if I have any issues. Sabrent 4.0 1TB PCIe M.2 NVMe drive w/ asrock taichi x570. BIOS is up to date/ I have read that the BCLK should be set to 100 when installing - to facilitate detection - but its just something I read somewhere and should be read with that in mind. Also have you checked in the bios that the board is seeing it at all?