B550M-itx/ac problem

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   On first boot, I made it to the bios. Hardware was properly identified and default settings looked good sonI saved and exited. At this point the monitor loses signal and nothing further happens. I let it run for 5 minutes, shut it down and restarted the PC. This time I can't even get to the bios. Ibadded a case speaker to makensure I was getting g through POST every time.. I got a jumper to clear CMOS and was able to get back to BIOS, saved and exited and the same thing happened. I have tried installing a graphics card with no change.. I have used the "int" and "ext" settings in bios. I have reseated processor and RAM.  I am running a 2200g with 16gb of Gskill trident Z RAM and the graphics card temporarily installed was a Radeon RX 570. I'm getting super frustrated. If anyone has any suggestions or advice to offer I would really appreciate the help.

Scott

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
DookeyKing Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 01 Apr 2021 Location: WV Status: Offline Points: 35	Post Options Post Reply Quote DookeyKing Report Post Thanks(0) Quote Reply Topic: B550M-itx/ac problem Posted: 01 Apr 2021 at 6:25am
	On first boot, I made it to the bios. Hardware was properly identified and default settings looked good sonI saved and exited. At this point the monitor loses signal and nothing further happens. I let it run for 5 minutes, shut it down and restarted the PC. This time I can't even get to the bios. Ibadded a case speaker to makensure I was getting g through POST every time.. I got a jumper to clear CMOS and was able to get back to BIOS, saved and exited and the same thing happened. I have tried installing a graphics card with no change.. I have used the "int" and "ext" settings in bios. I have reseated processor and RAM. I am running a 2200g with 16gb of Gskill trident Z RAM and the graphics card temporarily installed was a Radeon RX 570. I'm getting super frustrated. If anyone has any suggestions or advice to offer I would really appreciate the help. Scott

ThreeDee Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396	Post Options Post Reply Quote ThreeDee Report Post Thanks(0) Quote Reply Posted: 01 Apr 2021 at 1:29pm
	The 2200g isn't listed as a supported CPU for that motherboard ...
	\|Ryzen 5 5900\|ASRock X570 Taichi-BIOS 4.60\|2x16GB HyperX Predator RGB 3200@3600 1:1 IF\|ASRock RX 6700XT\|2 x PCIe 4.0 M.2 Drives for OS & Games\|850 WTT Seasonic 80+ Titanium PSU\|Noctua NH-D15\|

DookeyKing Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 01 Apr 2021 Location: WV Status: Offline Points: 35	Post Options Post Reply Quote DookeyKing Report Post Thanks(0) Quote Reply Posted: 01 Apr 2021 at 6:56pm
	I did not notice that there excluded processors when I purchased. Thanks for the heads up. Mystery solved. Scott