Taichi x570 Ryzen 3900x build problem

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hey everyone I just built a new system but all after I turn it on it won?�t go into the bios. Dr. debug just gives me a 00 each time

Motherboard: taichi x570 CPU: Ryzen 3900x Memory: Ripjaws F4-3200 Power Supply: Rosewell Xtreme RX950

I?�ve reseated the CPU several times. I?�ve moved the RAM around. I?�ve made sure the all the necessary power supply is connects are connected. I switched the GPU from PCI1 to PCI2. I?�ve made sure to connect the displays to the GPU. I?�m stumped!

Does anyone have any ideas?

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
fauxpaux Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 06 Jan 2021 Status: Offline Points: 3	Post Options Post Reply Quote fauxpaux Report Post Thanks(0) Quote Reply Topic: Taichi x570 Ryzen 3900x build problem Posted: 06 Jan 2021 at 2:32pm
	Hey everyone I just built a new system but all after I turn it on it won?�t go into the bios. Dr. debug just gives me a 00 each time Motherboard: taichi x570 CPU: Ryzen 3900x Memory: Ripjaws F4-3200 Power Supply: Rosewell Xtreme RX950 I?�ve reseated the CPU several times. I?�ve moved the RAM around. I?�ve made sure the all the necessary power supply is connects are connected. I switched the GPU from PCI1 to PCI2. I?�ve made sure to connect the displays to the GPU. I?�m stumped! Does anyone have any ideas?

muziqaz Members Profile Send Private Message Find Members Posts Add to Buddy List Groupie Joined: 04 Jan 2021 Location: London Status: Offline Points: 590	Post Options Post Reply Quote muziqaz Report Post Thanks(0) Quote Reply Posted: 06 Jan 2021 at 3:19pm
	Does it boot into Windows? Or you are not seeing any signs of life from the screen? I have secondary PC with two different generation GPUs, and display does not activate when I enter BIOS, however if I let PC boot up to windows, it activates and switches on once Windows loading screen shows up. I had to find one of the Display Port slots on secondary GPU which would show BIOS and then Windows, as other slots would only show either BIOS or just Windows :D Code 00 is referenced as dead CPU or CPU not getting power. Did you connect 4/8 pin CPU connector just above the socket? It is very rare to have dead CPU, those things don't simply die, unless you bend pins, or start cutting the lids off, or use a hammer
	folding@home