Can't Install W10 on X570 Pro4

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello,

I bought an X570 Pro 4 motherboard with an AMD Ryzen 7 3700X processor
All with a Gigabyte RTX2060 Super graphics card.

I have a single 8GB RAM bar in A2 (it is recognized by the bios)

It's been 4 days now that I try to do a new installation of windows on a 250 GB samsung 850 EVO SSD.

I created a bootable usb key with the microsoft tool. I just started the installer. When ue select my SSD, the utility tells me that it needs a GPT partition and not MBR.
I then do SHIFT + F10 to launch DISKPART
I select my record, do a clean
then a GPT convert. The command succeeded, I try a format fs = ntfs quick. The command stays at 0% and gives me an incorrect parameter error. My disk is now seen as having 2048 GB.

Then,
I tried to connect my SSD to USB on a second computer. I carry out the same commands (diskpart clean convert gpt then format ntfs) and there no problem.

I saw on a post to create a partition and copy the entire w10 key with Xcopy. Thing that I did.
I manage to boot on the partition of the SSD drive to start the installation and when I want to install, I get the following error:
0x80300002.

CHKDSK also gives no error.
I also tried to use RUFUS with version 1903 of W10. I am getting the same errors.

I also tried changing SSD to HDD, the result is the same.

Can somebody help me ?
Thank you

PS : I can provide some picture of the BIOS or the screen if you want
Sorry if my english is bad, I'm french :)

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Neskik Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 21 Jul 2020 Status: Offline Points: 5	Post Options Post Reply Quote Neskik Report Post Thanks(0) Quote Reply Topic: Can't Install W10 on X570 Pro4 Posted: 21 Jul 2020 at 1:15am
	Hello, I bought an X570 Pro 4 motherboard with an AMD Ryzen 7 3700X processor All with a Gigabyte RTX2060 Super graphics card. I have a single 8GB RAM bar in A2 (it is recognized by the bios) It's been 4 days now that I try to do a new installation of windows on a 250 GB samsung 850 EVO SSD. I created a bootable usb key with the microsoft tool. I just started the installer. When ue select my SSD, the utility tells me that it needs a GPT partition and not MBR. I then do SHIFT + F10 to launch DISKPART I select my record, do a clean then a GPT convert. The command succeeded, I try a format fs = ntfs quick. The command stays at 0% and gives me an incorrect parameter error. My disk is now seen as having 2048 GB. Then, I tried to connect my SSD to USB on a second computer. I carry out the same commands (diskpart clean convert gpt then format ntfs) and there no problem. I saw on a post to create a partition and copy the entire w10 key with Xcopy. Thing that I did. I manage to boot on the partition of the SSD drive to start the installation and when I want to install, I get the following error: 0x80300002. CHKDSK also gives no error. I also tried to use RUFUS with version 1903 of W10. I am getting the same errors. I also tried changing SSD to HDD, the result is the same. Can somebody help me ? Thank you PS : I can provide some picture of the BIOS or the screen if you want Sorry if my english is bad, I'm french :)

Neskik Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 21 Jul 2020 Status: Offline Points: 5	Post Options Post Reply Quote Neskik Report Post Thanks(1) Quote Reply Posted: 21 Jul 2020 at 3:37pm
	SOLVED ! The problem was not only about a w10 issue but on the config of the mobo. Since i was able to format everything that was on USB the problem was on the sata port. Here is my solution : After a lot of loading default setting for mobo, I change the Storage configuration of SATA port. By default all of them are in Auto (for Power). I just force them to ON and every thing work since :) I am able to install and format every thing that is on SATA. If my english is bad here is the solution in french : Je n'arrivais pas ? formater les disques SSD ou HDD brancher sur mes port SATA. Je pouvais formater tout ce qui était brancher en USB. Le bios et les live CD détecter mes disques en SATA mais ne pouvais pas y accéder correctement. Après plusieurs reset du bios. j'ai vu que par défaut l'alimentation des ports SATA était en "Auto" (normal théoriquement) j'ai donc forcer l'alimentation. Trois option sont disponibles (Enable/Disable/Auto) A partir de ce moment j'ai été capable de formater les disques SATA et donc d'installer W10 ou n'importe quel OS. Thanks :)