![]() |
5 short beeps at H97 Anniversary |
Post Reply ![]() |
Author | |
DVS75 ![]() Newbie ![]() Joined: 19 Aug 2025 Status: Offline Points: 60 |
![]() ![]() ![]() ![]() ![]() Posted: 19 Aug 2025 at 3:55am |
5 short beeps at H97 Anniversary start.
Can't get to BIOS - the display indicator just keeps blinking in stanby. Please let me know what I can check. Thank you! |
|
![]() |
|
DVS75 ![]() Newbie ![]() Joined: 19 Aug 2025 Status: Offline Points: 60 |
![]() ![]() ![]() ![]() ![]() |
Please let me know the beep codes for this particular model of motherboards.
If the BIOS is from American Megatrends, then 5 short beeps may be processor failure. But on forums I read it could be "GPU not detected" for ASRock. |
|
![]() |
|
Xaltar ![]() Moderator Group ![]() ![]() Joined: 16 May 2015 Location: Europe Status: Offline Points: 28748 |
![]() ![]() ![]() ![]() ![]() |
5 short beeps indicates that a display was not detected. It can be as simple as
a bad display cable or indicate the GPU is not found by the system. Without your full specs I can't provide much more. |
|
![]() |
|
![]() |
|
DVS75 ![]() Newbie ![]() Joined: 19 Aug 2025 Status: Offline Points: 60 |
![]() ![]() ![]() ![]() ![]() |
The processor ??Xeon E3 1270 v3 3.5 GHz ??has no built in GPU comodule, so I understand an external video card is required.
The fan of the GPU is spinning. I will test this videocard in another system. |
|
![]() |
|
DVS75 ![]() Newbie ![]() Joined: 19 Aug 2025 Status: Offline Points: 60 |
![]() ![]() ![]() ![]() ![]() |
While you are at it please let me know also if I can use a PSU with a 4-pin 12V connector for my processor, the TDP of Xeon E3 1270 v3 3.5 GHz is 80 Watts.
The motherboard has a 8-pin power connector. |
|
![]() |
|
Xaltar ![]() Moderator Group ![]() ![]() Joined: 16 May 2015 Location: Europe Status: Offline Points: 28748 |
![]() ![]() ![]() ![]() ![]() |
The 5 short beeps indicates the system has completed POST and is simply unable to
output a display. This means that the PSU is providing enough power to power up the board and CPU. If the PSU is providing insufficient power to initialize the GPU however, that could be the problem. The board will function just fine with a single 4pin power connector but generally speaking, most PSUs that only provide a single 4 pin CPU power connector are weak, either very old models with weak 12v rails or cheap and nasty budget PSUs. That said, your beep code indicates a successful POST as I said above so it may not be the cause. Try a different display output from the GPU and a different cable if you have one. Often 5 short beeps is simply the board not detecting your monitor. If your GPU is old, particularly an old server grade GPU (Quadro/Firepro) it may be incompatible with your motherboard, even if it works in a different system (with an older board). |
|
![]() |
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |