ab350k4 bios 4.63 new setting and 3333mhz ram!

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Ok I have a fatality ab350 k4 mobo that has been updated to beta bios 4.63 as 4.6 would not retain my dram or vddp voltage and as always the memory training never worked.After updating I discovered some new timing suggestions from the stilt for hynix A and M die ram. As I could only achieve 2800 stably and barely booted 2933 without having to reset the CMOS i figured id see whats up with the new bios and timings. Low and behold 3200mhz booted up on ram chips only rated to 2666mhz! So I try the faster timings at 3200. Still boots and stable too! Well im here, and that was drama free. Why not go for broke. 3333mhz on safe timings for hynix A die as recommended by stilt booted and tested stable. No luck on the fast settings though. But! memory training has worked on every failed attempt to post. So i start looking at some of the new options under advanced. Theres a few new things nothing groundbreaking. Except, thisunder advanced>AMD CBS> NDIO common options there is a setting for SOC overclock VID. It has 3 numerical spaces for input allows no periods for voltage and has zero information out there other than its not the actual voltage input for SOC. Nothing in the bios notes, nothing on this forum, there is literally zero info out there for it. Does anyone know what this setting does? what it changes?

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
redopracer Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 21 Feb 2018 Status: Offline Points: 7	Post Options Post Reply Quote redopracer Report Post Thanks(0) Quote Reply Topic: ab350k4 bios 4.63 new setting and 3333mhz ram! Posted: 21 Feb 2018 at 10:47am
	Ok I have a fatality ab350 k4 mobo that has been updated to beta bios 4.63 as 4.6 would not retain my dram or vddp voltage and as always the memory training never worked.After updating I discovered some new timing suggestions from the stilt for hynix A and M die ram. As I could only achieve 2800 stably and barely booted 2933 without having to reset the CMOS i figured id see whats up with the new bios and timings. Low and behold 3200mhz booted up on ram chips only rated to 2666mhz! So I try the faster timings at 3200. Still boots and stable too! Well im here, and that was drama free. Why not go for broke. 3333mhz on safe timings for hynix A die as recommended by stilt booted and tested stable. No luck on the fast settings though. But! memory training has worked on every failed attempt to post. So i start looking at some of the new options under advanced. Theres a few new things nothing groundbreaking. Except, this under advanced>AMD CBS> NDIO common options there is a setting for SOC overclock VID. It has 3 numerical spaces for input allows no periods for voltage and has zero information out there other than its not the actual voltage input for SOC. Nothing in the bios notes, nothing on this forum, there is literally zero info out there for it. Does anyone know what this setting does? what it changes?
	fatality ab350 k4 1600x 4.1ghz 1.4vcore 2666mghz 2x8 gskillz ram at 3333mghz gtx1060 6gb

foppe Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 11 Jul 2017 Status: Offline Points: 17	Post Options Post Reply Quote foppe Report Post Thanks(0) Quote Reply Posted: 21 Feb 2018 at 6:47pm
	cool. :) Could you link to those suggestions? :)
	AB350 Pro4, Ryzen 1600, 3.8GHz@1.35625v, Vengeance LPX 4x8GB b3000c15 2666@1.35v

redopracer Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 21 Feb 2018 Status: Offline Points: 7	Post Options Post Reply Quote redopracer Report Post Thanks(0) Quote Reply Posted: 22 Feb 2018 at 8:13am
	Yeah sure thing. http://www.overclock.net/forum/11-amd-motherboards/1624603-rog-crosshair-vi-overclocking-thread-2414.html I really want to know what this new setting is though. Its quite literally driving me insane as added VDDP_SOC settings for this board were one of two major gripes I had. It cant be voltage as you cant put a period in the setting and it quite literally says not VDDP_SOC voltage in its description. To note there is also a VDDPCL0 setting that we previously did not have that could prove beneficial to memory overclocking.So please anyone with a clue speak up!
	fatality ab350 k4 1600x 4.1ghz 1.4vcore 2666mghz 2x8 gskillz ram at 3333mghz gtx1060 6gb