Weird behavior on M2_1

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello, the UEFI cannot detect my 970EVO M.2 SSD on M.2_1 slot, I enabled/disabled CSM but no difference. There is no any SATA HDD connected, the screen always black when M.2 connected. I am using X470 Master SLI, any help would be appreciate.
Kind Regards,

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
flM75fQ Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 11 Nov 2017 Status: Offline Points: 16	Post Options Post Reply Quote flM75fQ Report Post Thanks(0) Quote Reply Topic: Weird behavior on M2_1 Posted: 21 Feb 2020 at 11:52am
	Hello, the UEFI cannot detect my 970EVO M.2 SSD on M.2_1 slot, I enabled/disabled CSM but no difference. There is no any SATA HDD connected, the screen always black when M.2 connected. I am using X470 Master SLI, any help would be appreciate. Kind Regards,

ASRock_TSD Members Profile Send Private Message Find Members Posts Add to Buddy List ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8592	Post Options Post Reply Quote ASRock_TSD Report Post Thanks(0) Quote Reply Posted: 21 Feb 2020 at 12:01pm
	Dear flM75fQ, Greetings, this is ASRock TSD. For your question, we have some suggestions for you to verify: 1. Please unplug the power cord and refer to user manual page.30 to clear CMOS. http://asrock.pc.cdn.bitgravity.com/Manual/X470%20Master%20SLI.pdf 2. Please only install one stick memory, CPU, graphics card and M.2 SSD to Ultra M2_1 slot to check if system can boot properly and also detect the M.2 SSD. 3. Install the M.2 SSD to M2_2 slot to check if system can work properly; able to post into BIOS and the SSD could be recognized. In general, the BIOS should work with PCIe SSD with default setting. So there's no need to configure any BIOS settings to make the M.2 SSD work. Thanks! All the best, ASRock TSD