No signal on boot

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi, new to the forum having just put together a new box in my move to Windows 10 finally.

ASRock B450 Pro4, AMD B450
AMD Ryzen??5 3600 +Wraith Stealth 

500W be quiet! BN246 System Power 9

Corsair Carbide Series 100R Mid-Tower
16GB (2x8GB) Corsair DDR4 Vengeance LPX Black, PC4-17000 (2133), Non-ECC Unbuffered, CAS 13-15-15-28, XMP 2.0, 1.2V
500GB WD Blue 3D, M.2 (2280) SATA III 6Gb/s SSD, 3D NAND, Read 560MB/s, Write 530MB/s, 95k/84k IOPS, Retail

The problem am having is on boot up, I get no signal to the monitor.
Am connected via a VGA cable, but have also tried it with hdmi.
I have an M.2 card installed and dvd drive, with the windows10 disc, ready to install, all the lights come on and drive spins as if it is doing something, but obviously I can't see what.

I have tried various options on the memory slots, but back to the manual with A2 + B2

Have removed the cmos battery for a couple of minutes in hope of resetting it, but still no signal.

I bought this montherboard as it said I would be able to run 3 monitors from it, its not for gaming so didnt want to install an additional graphics card.

Any help would be appreciated.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Donny Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 12 May 2020 Location: Doncaster Status: Offline Points: 6	Post Options Post Reply Quote Donny Report Post Thanks(0) Quote Reply Topic: No signal on boot Posted: 12 May 2020 at 2:04am
	Hi, new to the forum having just put together a new box in my move to Windows 10 finally. ASRock B450 Pro4, AMD B450 AMD Ryzen??5 3600 +Wraith Stealth 500W be quiet! BN246 System Power 9 Corsair Carbide Series 100R Mid-Tower 16GB (2x8GB) Corsair DDR4 Vengeance LPX Black, PC4-17000 (2133), Non-ECC Unbuffered, CAS 13-15-15-28, XMP 2.0, 1.2V 500GB WD Blue 3D, M.2 (2280) SATA III 6Gb/s SSD, 3D NAND, Read 560MB/s, Write 530MB/s, 95k/84k IOPS, Retail The problem am having is on boot up, I get no signal to the monitor. Am connected via a VGA cable, but have also tried it with hdmi. I have an M.2 card installed and dvd drive, with the windows10 disc, ready to install, all the lights come on and drive spins as if it is doing something, but obviously I can't see what. I have tried various options on the memory slots, but back to the manual with A2 + B2 Have removed the cmos battery for a couple of minutes in hope of resetting it, but still no signal. I bought this montherboard as it said I would be able to run 3 monitors from it, its not for gaming so didnt want to install an additional graphics card. Any help would be appreciated.

ThreeDee Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396	Post Options Post Reply Quote ThreeDee Report Post Thanks(0) Quote Reply Posted: 12 May 2020 at 2:08am
	what are you running for a video card? the 3600 does not come with integrated graphics so you will need a video card if you do not currently have one.
	\|Ryzen 5 5900\|ASRock X570 Taichi-BIOS 4.60\|2x16GB HyperX Predator RGB 3200@3600 1:1 IF\|ASRock RX 6700XT\|2 x PCIe 4.0 M.2 Drives for OS & Games\|850 WTT Seasonic 80+ Titanium PSU\|Noctua NH-D15\|

ThreeDee Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396	Post Options Post Reply Quote ThreeDee Report Post Thanks(0) Quote Reply Posted: 12 May 2020 at 2:08am
	..or you need to buy a G series APU .. ie .. 2200g .. 3400g ... etc
	\|Ryzen 5 5900\|ASRock X570 Taichi-BIOS 4.60\|2x16GB HyperX Predator RGB 3200@3600 1:1 IF\|ASRock RX 6700XT\|2 x PCIe 4.0 M.2 Drives for OS & Games\|850 WTT Seasonic 80+ Titanium PSU\|Noctua NH-D15\|

ThreeDee Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396	Post Options Post Reply Quote ThreeDee Report Post Thanks(0) Quote Reply Posted: 12 May 2020 at 2:12am
	I run the 3400g on an ASUS B350 Prime for my wife's setup .. she runs 3 monitors off of the 3 different video outputs from the motherboard and it's been a good setup for her. I'd go with the 3200g or 3400g as the onboard memory controller is a bit more robust than the 2200g and 2400g processors ..
	\|Ryzen 5 5900\|ASRock X570 Taichi-BIOS 4.60\|2x16GB HyperX Predator RGB 3200@3600 1:1 IF\|ASRock RX 6700XT\|2 x PCIe 4.0 M.2 Drives for OS & Games\|850 WTT Seasonic 80+ Titanium PSU\|Noctua NH-D15\|

Donny Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 12 May 2020 Location: Doncaster Status: Offline Points: 6	Post Options Post Reply Quote Donny Report Post Thanks(0) Quote Reply Posted: 12 May 2020 at 2:16am
	Thanks for the quick response, it was getting frustrating. In a discussion I had when I first bought the bits someone mentioned this. But when I read about the motherboard, it said it could run 3 monitors easily. So was hoping I didnt need an additional graphics card. But your answer seems to indicate what suspected. Have not built a desktop for about 6 years, so not up on the processors, should have had some advice before I started. Any suggestions for a good graphics card for a three monitor setup, not for gaming :(

ThreeDee Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396	Post Options Post Reply Quote ThreeDee Report Post Thanks(0) Quote Reply Posted: 12 May 2020 at 2:26am
	just about anything with 3 outputs on it will work for yuh as far as video card goes. You'll just need the appropriate video cables to match the outputs of your video card to whatever your monitor(s) take .. or return your 3600 and get a 3400g
	\|Ryzen 5 5900\|ASRock X570 Taichi-BIOS 4.60\|2x16GB HyperX Predator RGB 3200@3600 1:1 IF\|ASRock RX 6700XT\|2 x PCIe 4.0 M.2 Drives for OS & Games\|850 WTT Seasonic 80+ Titanium PSU\|Noctua NH-D15\|

Donny Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 12 May 2020 Location: Doncaster Status: Offline Points: 6	Post Options Post Reply Quote Donny Report Post Thanks(0) Quote Reply Posted: 12 May 2020 at 2:36am
	Appreciate the help, time to go back to internet on the old W7 for some more purchasing. Cheers Rich

Donny Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 12 May 2020 Location: Doncaster Status: Offline Points: 6	Post Options Post Reply Quote Donny Report Post Thanks(0) Quote Reply Posted: 12 May 2020 at 2:48am
	Sorry to be a wimp, just had a look around and foudn something I think would be suitable, any opinions on Asus Radeon RX 570 ROG STRIX OC 8GB Graphics Card Cheers

datonyb Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 11 Apr 2017 Location: London U.K. Status: Offline Points: 3139	Post Options Post Reply Quote datonyb Report Post Thanks(0) Quote Reply Posted: 12 May 2020 at 2:53am
	its a fine graphics card with ample life left in gaming if you so choose
	[url=https://valid.x86.fr/jpg250][/url] 3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold

ThreeDee Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396	Post Options Post Reply Quote ThreeDee Report Post Thanks(0) Quote Reply Posted: 12 May 2020 at 3:40am
	I run the RX570 4GB in my daughters 1080p "gamer" box paired with a 3600x .. great setup for an 11 yr old ..the spoiled brat, lol ...like datonyb said .. should be a great card for yuh
	\|Ryzen 5 5900\|ASRock X570 Taichi-BIOS 4.60\|2x16GB HyperX Predator RGB 3200@3600 1:1 IF\|ASRock RX 6700XT\|2 x PCIe 4.0 M.2 Drives for OS & Games\|850 WTT Seasonic 80+ Titanium PSU\|Noctua NH-D15\|