z170 extreme 4 and 7.50 bios changes?

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   So I recently upgraded from 3.20 to 7.50 due to it some how getting corrupt from BSoD windows that stop the system from posting could after few reset trying to get to load I went into the bios. it froze and from them on the logo screen was corrupt and I could no longer even get into the bios, So I Cmos reset and flashed 7.50 to clear and corruption. And I hope that is the end of that issue. as i dont want to be rebuild a new system.

Everything since normal except  how my cpu (6700k) is acting.
Windows power scheme for Minimum/Maximum processor state has always been 100/100 for 2 computer build(i7-920 and i7 6700k) and threw windows 7/10

on 3.20 I had Intel Speedstep(disable) and window ran 4ghz idle and 4.2ghz when there was a load. my old x58 i7 920 build was same way  as far as I can remember. Now of 7.50 I need Intel Speedstep(enable)to get that 4.2ghz, but cpu run always at 4.2ghz now. if I disable Intel speedstep  cpu run 4ghz and 4ghz only.

Now as  far I "Remember" CPU alway ran 4ghz idle and 4.2ghz under load, I could be wrong remember this, but I know for fact intel speedstep has always been disable in the bios and it never had problem running 4.2ghz

Anyone way to get the old behavior back?

I am also assuming  Intel Speed shift is not enable on these board? cause there is no such option in bios for this feature and HWinfo show it disabled

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
tsunami2311 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 19 Jun 2016 Status: Offline Points: 43	Post Options Post Reply Quote tsunami2311 Report Post Thanks(0) Quote Reply Topic: z170 extreme 4 and 7.50 bios changes? Posted: 24 May 2020 at 2:13am
	So I recently upgraded from 3.20 to 7.50 due to it some how getting corrupt from BSoD windows that stop the system from posting could after few reset trying to get to load I went into the bios. it froze and from them on the logo screen was corrupt and I could no longer even get into the bios, So I Cmos reset and flashed 7.50 to clear and corruption. And I hope that is the end of that issue. as i dont want to be rebuild a new system. Everything since normal except how my cpu (6700k) is acting. Windows power scheme for Minimum/Maximum processor state has always been 100/100 for 2 computer build(i7-920 and i7 6700k) and threw windows 7/10 on 3.20 I had Intel Speedstep(disable) and window ran 4ghz idle and 4.2ghz when there was a load. my old x58 i7 920 build was same way as far as I can remember. Now of 7.50 I need Intel Speedstep(enable)to get that 4.2ghz, but cpu run always at 4.2ghz now. if I disable Intel speedstep cpu run 4ghz and 4ghz only. Now as far I "Remember" CPU alway ran 4ghz idle and 4.2ghz under load, I could be wrong remember this, but I know for fact intel speedstep has always been disable in the bios and it never had problem running 4.2ghz Anyone way to get the old behavior back? I am also assuming Intel Speed shift is not enable on these board? cause there is no such option in bios for this feature and HWinfo show it disabled

RLGL Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 29 Jul 2018 Location: MN Status: Offline Points: 1995	Post Options Post Reply Quote RLGL Report Post Thanks(0) Quote Reply Posted: 24 May 2020 at 8:40pm
	Possibly try updating the Intel Management Engine.
	Asrock Z370 Gaming K6,Intel i7 8700K, Asrock x570 Taichi

tsunami2311 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 19 Jun 2016 Status: Offline Points: 43	Post Options Post Reply Quote tsunami2311 Report Post Thanks(0) Quote Reply Posted: 25 May 2020 at 12:13am
	does windows 10 not update that it self? i have never install drivers for that

tsunami2311 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 19 Jun 2016 Status: Offline Points: 43	Post Options Post Reply Quote tsunami2311 Report Post Thanks(0) Quote Reply Posted: 25 May 2020 at 12:24am
	really wish there was edit function on these forums. anyway Why is the internet bios update setting never work? it connected to the Ethernet cable but it say there is no "internet flash" both setting are auto but never worked even on 3.20 As for 4.20 ghz boost why does it no longer "boost" if intel speedstep is off? and why is in permanent boost mode when speedstep is on Intel turbo boost is what handles the boost which is enabled speedstep drop frequency below base when enabled last i checked. which I never wanted hence i always had it disabled

tsunami2311 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 19 Jun 2016 Status: Offline Points: 43	Post Options Post Reply Quote tsunami2311 Report Post Thanks(0) Quote Reply Posted: 25 May 2020 at 2:32am
	I let Windows find news drivers for IMEi to 1910.13.0.1060 nothing changed