ASRock x570 Steel Series |
Post Reply |
Author | |
Azrael907
Newbie Joined: 20 Jul 2020 Location: Alaska Status: Offline Points: 6 |
Post Options
Thanks(0)
Posted: 22 Jul 2020 at 4:46pm |
His video card is also a Gigabyte nVidia RTX 2070. Two 8gb sticks of 2933mhz DDR4, standard ssd.
|
|
Azrael907
Newbie Joined: 20 Jul 2020 Location: Alaska Status: Offline Points: 6 |
Post Options
Thanks(0)
|
Chip and Ram have been freshly installed into brand new motherboard. I have previously had this problem with my old computer. It would not let me adjust the settings until i installed an APU processor. The option was just not there. I know his Ryzen 5 is just a plain processor. Unfortunately replacing it is just not an option at this point. There just has to be a way to adjust the memory being reserved.
CPU is also jumping to turbo mode without even being used. Under 5% load and it is at turbo speed. Fresh install of Win10Pro as well. |
|
datonyb
Senior Member Joined: 11 Apr 2017 Location: London U.K. Status: Offline Points: 3139 |
Post Options
Thanks(0)
|
this problem usually is always down to a badly seated ram stick
other than that it could be 1 faulty ram stick and /or a badly seated cpu pin |
|
[url=https://valid.x86.fr/jpg250][/url]
3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
|
ThreeDee
Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396 |
Post Options
Thanks(0)
|
if RAM is seated properly (Clicked in) ..then here are some things to try
https://appuals.com/windows-10-wont-use-full-ram/ |
|
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
|
ThreeDee
Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396 |
Post Options
Thanks(0)
|
have you tried reseating your RAM? I've read somewhere where an individual was having same issue and it turned out that his RAM was fully seated
|
|
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
|
Azrael907
Newbie Joined: 20 Jul 2020 Location: Alaska Status: Offline Points: 6 |
Post Options
Thanks(0)
|
Windows 10 Pro 64 bit.
|
|
CopyThat
Newbie Joined: 29 Sep 2018 Status: Offline Points: 102 |
Post Options
Thanks(0)
|
What Windows are you running 32 bit or 64bit? Windows reserves the memory for 32bit.
|
|
ThreeDee
Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396 |
Post Options
Thanks(0)
|
Windows 10 64bit?
|
|
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
|
Azrael907
Newbie Joined: 20 Jul 2020 Location: Alaska Status: Offline Points: 6 |
Post Options
Thanks(0)
|
Hello there,
New setup with this board and a Ryzen 5 2600. 16gb of RAM. Windows is reporting that half of that is being reserved for hardware. Is there a way to disable the reserve to free up the memory? The path in other solutions to: Advanced > AMD CBS > NBIO Common Options > GFX Configuration is greyed out. Any kind of help would be greatly appreciated. |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |