A380 not working with B550M

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   MOBO: ASRock B550M Pro4
CPU: Ryzen 5700G
GPU: Arc A380
RAM: 16gbx4 3600mhz
Boot drive: ADATA Legend 800 1TB

Recently installed an intel arc a380 for transcoding but found it wasn't showing as an available device. Did some testing with an monitor but I couldn't get any display from the GPU not even into the BIOS; iGPU still displayed. At the same time it appeared to disable the M.2 M2_1 port as I was unable to boot into my drive until power-cycled a few times. Moving the boot drive to M2_2 had the same issue. After a few reboots the boot drive would show up again but it would be a coin flip if the drive would show up or not if rebooted. Once the A380 was removed there was no issues with either M.2 slot.
Going back to the gpu, resetting my BIOs settings also did nothing.

Tested the A380 in another computer and confirmed it is fully functional.

Updated BIOS from 3.20 to 3.40 still the same results in boot drive loss and no output from gpu.

Might be a specific BIOS setting that needs to be configured. I have already tried CSM enabled and disabled with 4g-decoding and resize bar enabled.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
expunged Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 21 Apr 2024 Status: Offline Points: 20	Post Options Post Reply Quote expunged Report Post Thanks(0) Quote Reply Topic: A380 not working with B550M Posted: 21 Apr 2024 at 5:18am
	MOBO: ASRock B550M Pro4 CPU: Ryzen 5700G GPU: Arc A380 RAM: 16gbx4 3600mhz Boot drive: ADATA Legend 800 1TB Recently installed an intel arc a380 for transcoding but found it wasn't showing as an available device. Did some testing with an monitor but I couldn't get any display from the GPU not even into the BIOS; iGPU still displayed. At the same time it appeared to disable the M.2 M2_1 port as I was unable to boot into my drive until power-cycled a few times. Moving the boot drive to M2_2 had the same issue. After a few reboots the boot drive would show up again but it would be a coin flip if the drive would show up or not if rebooted. Once the A380 was removed there was no issues with either M.2 slot. Going back to the gpu, resetting my BIOs settings also did nothing. Tested the A380 in another computer and confirmed it is fully functional. Updated BIOS from 3.20 to 3.40 still the same results in boot drive loss and no output from gpu. Might be a specific BIOS setting that needs to be configured. I have already tried CSM enabled and disabled with 4g-decoding and resize bar enabled.