A380 not working with B550M |
Post Reply |
Author | |
expunged
Newbie Joined: 21 Apr 2024 Status: Offline Points: 20 |
Post Options
Thanks(0)
Posted: 21 Apr 2024 at 5:18am |
MOBO: ASRock B550M Pro4
CPU: Ryzen 5700G GPU: Arc A380 RAM: 16gbx4 3600mhz Boot drive: ADATA Legend 800 1TB Recently installed an intel arc a380 for transcoding but found it wasn't showing as an available device. Did some testing with an monitor but I couldn't get any display from the GPU not even into the BIOS; iGPU still displayed. At the same time it appeared to disable the M.2 M2_1 port as I was unable to boot into my drive until power-cycled a few times. Moving the boot drive to M2_2 had the same issue. After a few reboots the boot drive would show up again but it would be a coin flip if the drive would show up or not if rebooted. Once the A380 was removed there was no issues with either M.2 slot. Going back to the gpu, resetting my BIOs settings also did nothing. Tested the A380 in another computer and confirmed it is fully functional. Updated BIOS from 3.20 to 3.40 still the same results in boot drive loss and no output from gpu. Might be a specific BIOS setting that needs to be configured. I have already tried CSM enabled and disabled with 4g-decoding and resize bar enabled. |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |