5 beeps, no signal. ASRock X470 Master Sli |
Post Reply |
Author | |
RayRavage
Newbie Joined: 29 Jun 2018 Status: Offline Points: 6 |
Post Options
Thanks(0)
Posted: 29 Jun 2018 at 1:49pm |
New build with a working graphics card.
Have played around with ram, etc. Result always ends with 5 beeps and no display. Could it be that I need to try using dvi instead of hdmi first? The CPU is the Ryzen 5 1500X G.SKILL Ripjaws V Series 8GB (2 x 4GB) 288-Pin DDR4 SDRAM DDR4 2666 (PC4 21300 That's the ram. GPU is Raedon RX550. Any ideas? |
|
datonyb
Senior Member Joined: 11 Apr 2017 Location: London U.K. Status: Offline Points: 3139 |
Post Options
Thanks(0)
|
[url=https://valid.x86.fr/jpg250][/url]
3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
|
RayRavage
Newbie Joined: 29 Jun 2018 Status: Offline Points: 6 |
Post Options
Thanks(0)
|
I dont have the pcie cable plugged in anywhere at all.
The psu is an evga 850 Bronze. A quick pic in case that helps. Do you think maybe if I tried a DVI cable instead of HDMI that would work? Tried a different gpu but same result, I doubt both are dead. https://ibb.co/e7KTwd Edited by RayRavage - 29 Jun 2018 at 10:30pm |
|
datonyb
Senior Member Joined: 11 Apr 2017 Location: London U.K. Status: Offline Points: 3139 |
Post Options
Thanks(0)
|
[url=https://valid.x86.fr/jpg250][/url]
3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
|
RayRavage
Newbie Joined: 29 Jun 2018 Status: Offline Points: 6 |
Post Options
Thanks(0)
|
Its plugged in, I dont have anything else from the power supply hooked up except the 24 pin cable to motherboard and the CPU cable.
The odd thing is the motherboard has room for another CPU pin. I have the 8 pin in use right now, still has space for another 4 pin. |
|
kerberos_20
Senior Member Joined: 06 Dec 2017 Location: czech republic Status: Offline Points: 3657 |
Post Options
Thanks(0)
|
its teh same odd thing as it was when 4pin got added for pentium4 u just need to fill it up :P
|
|
RayRavage
Newbie Joined: 29 Jun 2018 Status: Offline Points: 6 |
Post Options
Thanks(0)
|
I was debating on trying a dvi cable, trying a new gpu...and that's about it.
Swapped pci ports, single ram stick, dual, different slots. Seems like everything works except no signal. If I knew exactly what 5 beeps meant that would help, but what I did find says only something about the VGA card. Should I try using just 4 pins instead of 8 on the CPU plug? |
|
gizmic
Groupie Joined: 13 Jun 2018 Location: Hong Kong Status: Offline Points: 677 |
Post Options
Thanks(0)
|
just boot without plugging the gpu and see if it gives you the same error code
i'm not sure if its the same as my previous board (990FX killer)
but since i have water cooling and stuff my vga usually is not seated properly or requires a weird angle and most of the time works perfectly without the screws >.< but since youre using a lighter card have you tried plugging it in the other pci-e slot |
|
|
|
Ray62
Groupie Joined: 01 Jul 2018 Location: Germany, Berlin Status: Offline Points: 706 |
Post Options
Thanks(0)
|
Hello, 5 beeps means, that your CPU has a problem: Can also be found in the Asrock FAQs: - Insert both 8 pin and 4 pin power supply in the motherboard - If that does not help, check your CPU/cooler mounting, remove and install again - If no success, either the board and/or CPU is defective Good luck, Ray |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |