Print Page | Close Window

Taichi Ultimate X470 - bricked?

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=10702
Printed Date: 18 Jul 2025 at 10:20pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: Taichi Ultimate X470 - bricked?
Posted By: Supporter
Subject: Taichi Ultimate X470 - bricked?
Date Posted: 17 Jan 2019 at 5:55am
Hello folks,

I use the Taichi Ultimate X470 with an AMD Ryzen 7 2700X and a pair of G.Skill Trident Z RAM (2x16GB).

Unfortunately the attempt to update the board to BIOS version 2.00 caused my system to fail.
I updated within Windows and the progress finished without any warning or oddnesses, but after rebooting the system, nothing works anymore.
There is no graphics output at all (no chance to reach BIOS), the fans sound like the are speeded up and down. I can only shut down the system by pressing the power button for many seconds.
Many codes are shown in the little display, constantely changing. There is
90, 15, 36, 4F, 54, 7A, 3E...

Changing RAM to 1x4GB did not change anything.

Without any RAM, the system behaves a little different, the display shows only code number 60.

I already tried to reset the BIOS using the reset button on the mainboard, also in combination with unplugging the whole system for one hour from the wall outlet.

Can anybody help? I am a little desperate...
Is it possible to go back to former BIOS version anyhow?



Replies:
Posted By: Supporter
Date Posted: 23 Jan 2019 at 2:16am
Noone?


Posted By: paologab
Date Posted: 23 Jan 2019 at 10:43pm
did you searched for bios recovery?
If I'm not wrong, we have AMI bios, so you can have a last chance, try with amiboot.rom (google it)... and if it works, pls, let us know


-------------
AMD Ryzen 7 2700X w/Wraith prism
x470 Taichi bios 3.50
16gb HX432C16PB3K2/16 (hynix H5AN8G8NCJR-UHC)
M.2 970 EVO, SATA SSD, 2 SATA HDD
AMD Radeon RX 580 8G OC
Linux Kernel 5.4
Manjaro Stable XFCE


Posted By: XmanSE
Date Posted: 24 Jan 2019 at 1:24pm
The problem is the taichi in the side of amd doesn't have any bios recovery feature, so always bios flashing is a risk.

Instant flash is in theory the safests method to flash it, and always is the very firts option, i did it 3 times and no problems, with windows all can be happend.

Try this, is not from asrock but maybe it can work. If it works tell us.

https://www.biostar.com.tw/app/en/support/faq_content.php?S_ID=392

-------------
X470 Taichi | Ryzen 9 3900X | 8x2 GSkill Trident Z RGB | Asus Strix RTX 2080ti | Samsung 970 Evo+ | EVGA 750 GQ


Posted By: paologab
Date Posted: 24 Jan 2019 at 6:35pm
Yes too much bricked mobo with flash within Windows.
Me too I flashed each version (included JZ's ones) with no issue within UEFI.
Still, it's interesting to know whether this recovery works also for ASRock

-------------
AMD Ryzen 7 2700X w/Wraith prism
x470 Taichi bios 3.50
16gb HX432C16PB3K2/16 (hynix H5AN8G8NCJR-UHC)
M.2 970 EVO, SATA SSD, 2 SATA HDD
AMD Radeon RX 580 8G OC
Linux Kernel 5.4
Manjaro Stable XFCE


Posted By: pixbin
Date Posted: 11 Jan 2020 at 5:43am
Hi, I need some advice. I have:

ASRock X470 Taichi Ultimate
2x Ballistix Sport LT 16GB DDR4-3200 UDIMM (BLS16G4D32AESC)
AMD Athlon 3000G

After power up with power button on board or CASE(can not off via the power button on board. Only with the power button PSU). The LED MB backlight plate only flashes blue. Dr. Debug is off, no code. Cpu fan is spinning. LCD monitor no signal.


I tried:
- I pressed Clear CMOS Button (PSU disconnected).
- I put CMOS battery out of the board for 12 hours.
- I start without the front panel headers plugged in.
- Start only cpu + cpu fan (no ssd, no hdd).
- Start with ram on A2 + B2 and only A2.
No status change.

-------------
et cetera


Posted By: pixbin
Date Posted: 11 Jan 2020 at 5:49am
Originally posted by pixbin pixbin wrote:

Hi, I need some advice. I have:

ASRock X470 Taichi Ultimate
2x Ballistix Sport LT 16GB DDR4-3200 UDIMM (BLS16G4D32AESC)
AMD Athlon 3000G

After power up with power button on board or CASE(can not off via the power button on board. Only with the power button PSU). The LED MB backlight plate only flashes blue. Dr. Debug is off, no code. Cpu fan is spinning. LCD monitor no signal.


I tried:
- I pressed Clear CMOS Button (PSU disconnected).
- I put CMOS battery out of the board for 12 hours.
- I start without the front panel headers plugged in.
- Start only cpu + cpu fan (no ssd, no hdd).
- Start with ram on A2 + B2 and only A2.
No status change.


all components are new.

-------------
et cetera


Posted By: paologab
Date Posted: 11 Jan 2020 at 4:11pm
Before someone more experienced answers,
is it a new build that never started or was it working?

If it never started, I think that you have to update the bios before you plug the 3000.

If you bricked flashing new bios, try clearing cmos many times.

Also unplug from the wall the pc an remove the bios battery and wait at least half hour.



-------------
AMD Ryzen 7 2700X w/Wraith prism
x470 Taichi bios 3.50
16gb HX432C16PB3K2/16 (hynix H5AN8G8NCJR-UHC)
M.2 970 EVO, SATA SSD, 2 SATA HDD
AMD Radeon RX 580 8G OC
Linux Kernel 5.4
Manjaro Stable XFCE


Posted By: paologab
Date Posted: 11 Jan 2020 at 4:12pm
Ops sorry, reading from little screen disguised me.
You already tried last things

-------------
AMD Ryzen 7 2700X w/Wraith prism
x470 Taichi bios 3.50
16gb HX432C16PB3K2/16 (hynix H5AN8G8NCJR-UHC)
M.2 970 EVO, SATA SSD, 2 SATA HDD
AMD Radeon RX 580 8G OC
Linux Kernel 5.4
Manjaro Stable XFCE


Posted By: John29
Date Posted: 11 Jan 2020 at 10:56pm
Unless you can get help from Asrock support may be they can supply you with a bootable   USB drive that you will be able flash the BIOS, otherwise you will have two get a new bios chip unfortunately they are solder,take to some one to repair.
good luck

ASROCK X470 Taichi bios L3.77 Ryzen 3700X
AMD Ryzen 7 3700X All core at 4200
Noctua NH-U12A
Nvidia 1060 6gb
Samsung 970 Pro M.2
Samsung 860 EVO M.2
TeamGroup Dark Pro "8Pack Edition" 4x8 32GB PC4-25600C14 3200c14 running at 3600C16 at 1.380
Seasonic 750 Platinuim


Posted By: pixbin
Date Posted: 12 Jan 2020 at 12:11am
Thanks for the recommendations. After search on asrock support page.

I have identified the bios version. My board has a bios version: P1.20.

I think that's a problem. Old bios and new cpu.

https://www.asrock.com/support/index.asp?cat=FindBIOS

-------------
et cetera


Posted By: Xaltar
Date Posted: 12 Jan 2020 at 3:27am
Indeed, your CPU needs P3.50. A BIOS update should get you up and running

-------------


Posted By: pixbin
Date Posted: 12 Jan 2020 at 6:03pm
I wrote asrock support, waiting for an answer (no boot ...).

Can you give advice? Which processors are running with BIOS P1.20?

On the asrock page, I don't see the cpu list for P1.20 BIOS.

https://www.asrock.com/mb/AMD/X470%20Taichi%20Ultimate/index.asp#BIOS

Thanks

-------------
et cetera


Posted By: pixbin
Date Posted: 17 Jan 2020 at 3:09pm
Originally posted by pixbin pixbin wrote:

I wrote asrock support, waiting for an answer (no boot ...).

Can you give advice? Which processors are running with BIOS P1.20?

On the asrock page, I don't see the cpu list for P1.20 BIOS.

https://www.asrock.com/mb/AMD/X470%20Taichi%20Ultimate/index.asp#BIOS

Thanks


Sry for spam. The first time I read it. I did not see it(right column) - https://asrock.com/mb/AMD/X470%20Taichi%20Ultimate/index.asp#CPU


-------------
et cetera



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net