Taichi Ultimate X470 - bricked?

pixbin wrote: I wrote asrock support, waiting for an answer (no boot ...). Can you give advice? Which processors are running with BIOS P1.20? On the asrock page, I don't see the cpu list for P1.20 BIOS. https://www.asrock.com/mb/AMD/X470%20Taichi%20Ultimate/index.asp#BIOS Thanks

Sry for spam. The first time I read it. I did not see it(right column) - https://asrock.com/mb/AMD/X470%20Taichi%20Ultimate/index.asp#CPU

Indeed, your CPU needs P3.50. A BIOS update should get you up and running

Unless you can get help from Asrock support may be they can supply you with a bootable   USB drive that you will be able flash the BIOS, otherwise you will have two get a new bios chip unfortunately they are solder,take to some one to repair.
good luck

ASROCK X470 Taichi bios L3.77 Ryzen 3700X
AMD Ryzen 7 3700X All core at 4200
Noctua NH-U12A
Nvidia 1060 6gb
Samsung 970 Pro M.2
Samsung 860 EVO M.2
TeamGroup Dark Pro "8Pack Edition" 4x8 32GB PC4-25600C14 3200c14 running at 3600C16 at 1.380
Seasonic 750 Platinuim

Before someone more experienced answers,
is it a new build that never started or was it working?

If it never started, I think that you have to update the bios before you plug the 3000.

If you bricked flashing new bios, try clearing cmos many times.

Also unplug from the wall the pc an remove the bios battery and wait at least half hour.

Hi, I need some advice. I have:

ASRock X470 Taichi Ultimate
2x Ballistix Sport LT 16GB DDR4-3200 UDIMM (BLS16G4D32AESC)
AMD Athlon 3000G

After power up with power button on board or CASE(can not off via the power button on board. Only with the power button PSU). The LED MB backlight plate only flashes blue. Dr. Debug is off, no code. Cpu fan is spinning. LCD monitor no signal.


I tried:
- I pressed Clear CMOS Button (PSU disconnected).
- I put CMOS battery out of the board for 12 hours.
- I start without the front panel headers plugged in.
- Start only cpu + cpu fan (no ssd, no hdd).
- Start with ram on A2 + B2 and only A2.
No status change.