(Solved)Z390 PRO4 5 beep on power on
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=13993
Printed Date: 26 Dec 2024 at 6:52pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: (Solved)Z390 PRO4 5 beep on power on
Posted By: FirefoxSystem
Subject: (Solved)Z390 PRO4 5 beep on power on
Date Posted: 05 Apr 2020 at 9:26am
Hello everyone,
I recently updated my old computer with the following components:
- Motherboard Z390 PRO4
- Intel Core i7 9700K
- 2x8 GB Crucial 2400 MHz (BLS8G4D32AESBK)
- Samsung EVO 970 NVMe SSD (On slot M.2_1)
There are no other peripherals installed, no video card.
Everything works perfectly and the performance without any overclocking is excellent.
For some days, when the computer was turned on, the motherboard emits 5 beeps before the single normal beep during the post. But then the whole computer runs smoothly and Windows loads in less than 3 seconds.
Searching the net, I seemed to understand that 5 beeps correspond to a generic "CPU Error". Thinking about management problems of the 9th series processor I updated the bios to version 4.40 but the problem continues to arise.
Any suggestions?
Thanks for your help
|
Replies:
Posted By: ASRock_TSD
Date Posted: 07 Apr 2020 at 10:25am
Dear FirefoxSystem,
Thanks for posting.
Regarding your question, try loading BIOS to default and clear CMOS to try if the symptom will still appear.
With thanks,
ASRock TSD
|
Posted By: FirefoxSystem
Date Posted: 10 Apr 2020 at 2:58am
By loading the default settings in the BIOS the problem is gone.
I hadn't done it believing that after the BIOS update this would happen automatically.
Thank you very much
|
|