Print Page | Close Window

How to set voltage on Z170 Pro4/D3?

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: http://forum.asrock.com/forum_posts.asp?TID=3812
Printed Date: 09 May 2021 at 3:31pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: How to set voltage on Z170 Pro4/D3?
Posted By: plovik
Subject: How to set voltage on Z170 Pro4/D3?
Date Posted: 16 Nov 2016 at 4:57pm
" rel="nofollow - Hello. Motherboard Z170 Pro4/D3, BIOS 1.90 . During overclocking my i5 6400 faced with voltage problem, namely I can't set fixed CPU Vcore voltage - there is no option in the drop-down list, but I just can set an offset. So, how to OC my i5 6400?



Replies:
Posted By: Xaltar
Date Posted: 16 Nov 2016 at 5:18pm
The offset works in millivolts (mV) so entering an number like 100 in the box will result in a 0.1v increase in your core voltage. I would suggest you bump the voltage by 20mV at a time not exceeding 150mV, especially if you are on air cooling.

So, enter 20 into the box and then boot and test for stability, if unstable try 40 then 60 etc but not higher than 150. Keep a solid eye on your temps, anything over 80c under heavy load (prime95 for example) will require you to dial back the OC and vCore. 


-------------



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net