ASRock z690m-ITX BIOS 18.04
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=44464
Printed Date: 08 Nov 2024 at 12:21pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: ASRock z690m-ITX BIOS 18.04
Posted By: aolish
Subject: ASRock z690m-ITX BIOS 18.04
Date Posted: 21 Jun 2024 at 7:42am
Hello all, I've noticed a new bios version that had been released (18.04) which is suppose to apply Intel recommended voltage settings. However it seems this only applies to the K series of Intel chips unless I am reading this wrong. It reads:
"Optimize BIOS default for 13&14th Gen K SKU by Intel recommended settings."
Will this apply for the 13700 non-K version? If not, will ASRock come out with a bios version for non-K chip owners? My CPU sky rockets to insane temperatures and this has always gotten me worried over the longevity of my computer.
|
Replies:
Posted By: aclar
Date Posted: 07 Sep 2024 at 2:28am
I purchased new i9-14900 (non "K" version) and Z690M-ITX/ax motherboard but before installing the CPU I upgraded the BIOS to v19.02. I assume the upgrade was successful because the alternating orange/green blinking light turned solid green after about 5 minutes. After installing CPU, RAM, and connecting P/S (not put inside case), I shorted the motherboard's two power-on pins, but neither my power supply or CPU fans turned on. Only the flashback status LED remained lit green. I know the RAM, and P/S are good because they work on an identical motherboard with BIOS v19.02. The P/S & CPU fans turn on if I short the green & black wires on the 24-PIN power supply connector.
I contacted Asrock yesterday at 3PM Pacific Time but have yet to receive a call back.
|
|