ASRock z690m-ITX BIOS 18.04

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello all, I've noticed a new bios version that had been released (18.04) which is suppose to apply Intel recommended voltage settings. However it seems this only applies to the K series of Intel chips unless I am reading this wrong. It reads:

"Optimize BIOS default for 13&14th Gen K SKU by Intel recommended settings."

Will this apply for the 13700 non-K version? If not, will ASRock come out with a bios version for non-K chip owners? My CPU sky rockets to insane temperatures and this has always gotten me worried over the longevity of my computer.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
aolish Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 10 Apr 2023 Location: New York Status: Offline Points: 40	Post Options Post Reply Quote aolish Report Post Thanks(0) Quote Reply Topic: ASRock z690m-ITX BIOS 18.04 Posted: 21 Jun 2024 at 7:42am
	Hello all, I've noticed a new bios version that had been released (18.04) which is suppose to apply Intel recommended voltage settings. However it seems this only applies to the K series of Intel chips unless I am reading this wrong. It reads: "Optimize BIOS default for 13&14th Gen K SKU by Intel recommended settings." Will this apply for the 13700 non-K version? If not, will ASRock come out with a bios version for non-K chip owners? My CPU sky rockets to insane temperatures and this has always gotten me worried over the longevity of my computer.

aclar Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 07 Sep 2024 Status: Offline Points: 15	Post Options Post Reply Quote aclar Report Post Thanks(0) Quote Reply Posted: 07 Sep 2024 at 2:28am
	I purchased new i9-14900 (non "K" version) and Z690M-ITX/ax motherboard but before installing the CPU I upgraded the BIOS to v19.02. I assume the upgrade was successful because the alternating orange/green blinking light turned solid green after about 5 minutes. After installing CPU, RAM, and connecting P/S (not put inside case), I shorted the motherboard's two power-on pins, but neither my power supply or CPU fans turned on. Only the flashback status LED remained lit green. I know the RAM, and P/S are good because they work on an identical motherboard with BIOS v19.02. The P/S & CPU fans turn on if I short the green & black wires on the 24-PIN power supply connector. I contacted Asrock yesterday at 3PM Pacific Time but have yet to receive a call back.