970A-G/3.1 Ram help
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=4454
Printed Date: 19 Apr 2024 at 4:30pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: 970A-G/3.1 Ram help
Posted By: Lokain
Subject: 970A-G/3.1 Ram help
Date Posted: 21 Feb 2017 at 2:03am
|
" rel="nofollow - Hi Sorry first of all this is my first computer build in over 20 years so everything is new to me again. I am trying to run memory D3 2400 32GB C10 GSkill TriX K4 (F3-2400C10Q-32GTX) No matter what I do it shows up randomly between 666 to 1333 speed : Did i choose the wrong ram for this mb? And will that ram work on the 990FX Extreme9at 2400 mhz or do i need to send the ram back and trade it for ram that will work Again sorry for asking such an easy question My mind is blown on figuring it out
|
Replies:
Posted By: Xaltar
Date Posted: 21 Feb 2017 at 3:15am
|
" rel="nofollow - I see no ASRock AMD based board's listed under it's compatibility list and it is not listed on your board's compatibility list either so there is a good chance it isn't properly compatible with your system. Do you have the 990FX Extreme 9 or the 970a-g/3.1? Here is the QVL list for that RAM: http://www.gskill.com/en/product/f3-2400c10q-32gtx (copy paste link and click the QVL tab toward the bottom) 990FX compatibility list: http://www.asrock.com/mb/AMD/990FX%20Extreme9/?cat=Memory (copy paste link) ------------- 
|
Posted By: Lokain
Date Posted: 21 Feb 2017 at 7:02am
|
I have the 970a-g/3.1 i will have the 990 extreme 9 in a few days ------------- https://valid.x86.fr/x8d3fa" rel="nofollow"> 
|
Posted By: wardog
Date Posted: 21 Feb 2017 at 7:37am
" rel="nofollow -
Below is what G.Skill themselves guarantees to work on the 990FX Extreme9. http://www.gskill.com/en/configurator?manu=52&chip=42&model=1974 In my Sig below I have 32GB(4x8GB) kit F3-2133C10Q-32GSR running just fine on my Extreme9. If you only want a 16GB(2x8GB) kit I believe the F3-2133C10D-16GSR will work too. |
Lokain wrote:Posted By: wardog
Date Posted: 21 Feb 2017 at 7:40am
|
That F3-2400C10Q-32GTX you mention in your first post may probably be made to work on the 990FX Extreme9. It's probably too much for the 970 board you have. |
Posted By: wardog
Date Posted: 21 Feb 2017 at 8:13am
|
A note: Before you install the 990X Extreme9......... You'll need to peel the thin film sheeting from the Northbridge, Southbridge, and VRM tin covers. This is IMPORTANT. Leaving it in place does not allow for proper cooling of the three. It must be removed. Lifting it from one corner usually allows it to be peeled up and off completely. It is a much easier task to do before you install it. Trust me. I've built dozens of builds with this motherboard. |
Posted By: Lokain
Date Posted: 22 Feb 2017 at 8:18am
|
thank you for the advice i forgot to do that with the 970 wont forget that again smiles ------------- https://valid.x86.fr/x8d3fa" rel="nofollow">
|
Posted By: wardog
Date Posted: 22 Feb 2017 at 9:01am
|
" rel="nofollow - Lokain, let us know when you get your 990FX Extreme9 installed. Let's see if we can't get that four sticks of 2400 up and running on it. What processor are/will you be running with it? |