Intel Motherboards - New built X299 Taichi, won't post

Print Page | Close Window

New built X299 Taichi, won't post

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=6531
Printed Date: 17 Sep 2024 at 4:07am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: New built X299 Taichi, won't post

Posted By: Wladimir
Subject: New built X299 Taichi, won't post
Date Posted: 08 Nov 2017 at 4:24am

" rel="nofollow -

When I turn the PSU on, motherboard lights turn on.

However when I press the power button, it turns on for less than a second and then turns off (no beep).

Already double checked, removed and placed everything again, but got the same behavior.

If I remove the 8-pin CPU power cable, then it turns on and stay on, but with the expected error code (Dr Debug) 00.

Found a lot of possible causes searching online, but couldn't find a solution...

One thing that I tried was to remove everything, and keep just the case, PSU, mobo and CPU, both with or without the cooler.

Would it boot (or give a different error) without the CPU cooler?

My configuration:

MOBO: ASRock X299 Taichi

Processor: Intel Core I9 7920

Case: CoolerMaster MasterCase Pro 5

PSU: Corsair HX750

Cooler: CoolerMaster MasterLiquid Pro 120

Replies:

Posted By: jman
Date Posted: 03 Mar 2018 at 6:48pm

" rel="nofollow - I just wanted to say this is my exact problem to a T. I have no idea how to solve this one. Have you had any luck since you posted?

-------------
Regards,

J