H110 PRO BTC+ randomly fails to init. all GPUs
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=7028
Printed Date: 27 Jul 2025 at 12:05pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: H110 PRO BTC+ randomly fails to init. all GPUs
Posted By: mladentripalo
Subject: H110 PRO BTC+ randomly fails to init. all GPUs
Date Posted: 21 Dec 2017 at 10:44pm
|
I have Asrock H110 pro BTC rig with 13x XFX rx580/8GB cards. Rig is working and mining fine, there are few pictures of rig... https://photos.app.goo.gl/2M515OB8hErDmBlF2" rel="nofollow - https://photos.app.goo.gl/2M515OB8hErDmBlF2 It is not my 1st rig, i build them alot and i build them alone by own design... this specific one dual mines Ether/Lbry 392/990+ MHashes/s and it is very stable and under 67c ... it usually works for days before need to reset. MY PROBLEM IS: Sometimes when i reset the board (either trough software or by RST button) board randomly fails to "spin" one or more (usualy 1 or 1-3) graphics cards and after OS boots up (win or linux - no matter) this card(s) that "failed to start" are simply missing... as they are not connected to MBO. Cards that fail are random... it can be card 5, 6, or 9 or 1, it happens randomly. So before booting OS i have to check if all cards are spinning the fans. If fans on some cards fail to spin at system reset i have to quickly enter boot menu (F11) and then reset the MBO if i see "dead" card. If not i simply choose to continue boot. Now this happens only when i use XFX ... i also have one 13rig machine with sapphire NITRO rx580/8GB and have no trouble there. I even have one 13 rig (same board) with mixed rx480/nvidia1070/rx580 and no problems there, only with XFX. Since this rig is dual mining excelently i dont have reason to doubt risers or power or whatever... there is obviously some disagreement between MBO and GPUs at reset time and i discovered no BIOS setting to solve it. If anyone have information how to solve this i would appreciate it. WHAT I TRIED AND FAILED: Gen1/2 setting, downclocking ram/cpu, vt-d on/off, virtualization on/off, audio/onboard VGA/multimonitor/serial/paralel off/on, clearing CMOS/loading defaults, flashing to 1.11 BIOS etc. nothing worked, problem remains >< Detailed rig spec: Asrock H110 PRO BTC+ Intel Celeron G3930 DDR4 Crucial 8GB 2x LC1200W platinum v2.4 PSU M2 SSD WD Green 120GB 13x XFX RX580/8GB BLACK edition GPU |
Replies:
Posted By: theduall111
Date Posted: 23 Dec 2017 at 10:49pm
|
I'm having the exact same problem. Can't find a solution for a week now. I will be returning these motherboards. |
Posted By: Kosinus
Date Posted: 04 Feb 2018 at 6:18am
|
" rel="nofollow - Have same problem, mixed gpu, 9x spphire pulse rx580 and 4x asus rx570. Random 580 gpu stop spinning and are dead on boot, 570 gpus work just fine on every boot. Tryed a bunch of things but no luck solving the mystery, anyone have solution? |
Posted By: mcminer
Date Posted: 07 Feb 2018 at 4:39am
|
" rel="nofollow - seems I'm not the only one having this issue. Got 13 rx560 4gb ram (mixed vendors). When I press the power, some random cards are not starting (vents do not start). I have to press the reset button multiple times, till I got all vents spinning. In general, I got 1 to 5 random cards which are not starting. I got 2 different risers models, 006c and 008s. happening to both. Even for 6 cards connected, I got this issue. Bios was updated to latest version. Has anyone found a solution? Thanks.
|
Posted By: wardog
Date Posted: 07 Feb 2018 at 8:53am
Have you followed the info at: http://asrock.com/microsite/H110ProBTC+/ |
mcminer wrote:Posted By: vlds
Date Posted: 15 Apr 2018 at 5:49am
|
" rel="nofollow - I have same issue, what should I do to fix it? On MB connected 24pin + 8pin + 2x4pin (MOLEX) + SATA It start randomly GPU cards. Different GPU start when I click reset. Finally with 1/10 chanse all GPU starts. After GPU started all works as expected. GPU not started in this case means it does not even spinning fans during POST This happened with all my Gigabyte RX 560 OC 4G (rev. 2.0) (GV-RX560OC-4G) and repeated on GPUs with different memory vendor and without changes in BIOS of GPU. Note: at the same time PowerColor RX560 cards starts always on the same MB Same behaviour on 4 my MBs (from different parties). Can it be fixed or I should return MBs? |
Posted By: Hurrdurrasrock
Date Posted: 19 Jun 2018 at 11:31pm
|
" rel="nofollow - Hi, same problem here. Has anyone found a solution? Can someone share their experience? A random gpu fails to initialize on reboot.It doesn't post. On a subsequent reset, without touching anything else, the card may boot, but another random card may fail to initialize in its place. |
Posted By: Globalthinker
Date Posted: 31 Dec 2018 at 7:04pm
| I have the exact same problem. Even with just 4 GPUs one GPU will randomly not spin up. Resetting the mobo until all gpus are detected works. Not a good solution. Will replace with some other mobo. |
Posted By: Arman92
Date Posted: 25 Mar 2019 at 9:24pm
|
I have the same problem here. I have 3 rigs with this MB, 2 of them are using Server PSUs for GPUs and for the other I'm using two desktop PSUs. After months of struggling with this issue, I finally noticed that if GPUs power up only slightly before turning on the MB, this won't happen and all of the GPUs will happily init and work. So I turn on my Server PSUs first, then the Motherboard PSU and then turn on the MB. Unfortunately on my other rig that is using two desktop PSUs I can not do this sequential power-up and I still face this annoying issue. I really wish Asrock team could fix this problem. |
Posted By: behnamgolds
Date Posted: 13 Mar 2021 at 5:20pm
|
I have the exact same problem on Asrock h110 pro btc+ mobo with 12 XFX rx580 GPUs. Works fine on Asus B250 mining expert and Biostar B250 btc pro mobos. I also tried many things , relevant and irrelevant, tried to turn on the GPUs before and at the same time with the mobo, tried different BIOS firmwares, disable and enable every single option on mobo. And don't even think about getting an answer from Asrock. Anyone got any pointers to fix this somehow£ |
Posted By: tmerkaj
Date Posted: 22 Mar 2021 at 10:24pm
|
Hi I have the same Asrock h110 pro btc+ however the key board is not recognised, none of the keys work to set it up. I see in moniotor press F2 to set it up but there is no response when i press the keys. the keyboard is PS2 keyboard. the light on keyboard is on. Does anyone know what's going on£ |
Posted By: justwork
Date Posted: 06 Apr 2021 at 5:29am
Nope, I can't even get mine to work with more than 2 Nvidia Tesla M40's. You can try this scheme another user posted. Didn't help me but YMMV http://forum.asrock.com/forum_posts.asp£TID=6589&PID=81711&title=h110-pro-btc-cannot-boot-with-more-than-9-gpu#81711" rel="nofollow - http://forum.asrock.com/forum_posts.asp£TID=6589&PID=81711&title=h110-pro-btc-cannot-boot-with-more-than-9-gpu#81711 hxxp://forum[.]asrock[.]com/forum_posts.asp£TID=6589&PID=81711&title=h110-pro-btc-cannot-boot-with-more-than-9-gpu#81711 |
Posted By: justwork
Date Posted: 06 Apr 2021 at 5:37am
| Forum software keeps mangling URL. The pound sign(£) should be a question mark. |
Posted By: salate
Date Posted: 19 Apr 2021 at 11:55pm
|
Hi, did somebody solve the problem already ? I have AsRock H110 BTC+ with 8 GPU, mix of RX580, RX590, and RX470. When booting some of the GPUSs, 1 or 2 are not recognized by BIOS, after few restarts it works OK. I changed PCIe riser with cables but did not solve the problem. thanks |
Posted By: salate
Date Posted: 20 Apr 2021 at 12:01am
| One note... I have also another RIG with the same MOBO AsRock H100 BTC+ with 8x Sapphire RX470 and never had this issue on this rig, so it looks it could be related to some GPU models or PSU. |