Still no RGB support

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I have a 450m/ac board and the RGB settings in polychrome have never worked right. Red and green are reversed and if I set a static color via the remote it will flash its opposite color so if its all read lights it flashes green randomly then goes back to red.

I did this : 
If you haven't, you might want to try the following steps

1. Open CMD with Adminstrator
2. Direct the CMD to the folder where ASRRGBLED is located
try : cd C:\Program Files (x86)\ASRock Utility\ASRRGBLED\Bin
3. After that copy this command ".\wICPFLASHADSBv2.exe/File=nu51_3.04"

Nothing. Only fix I found is setting my front LED to the color I want with polychrome, uninstall it and set the colors static with a remote then synch it with the MB button.

HOT GARBAGE

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
RGBlightsarebad Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 24 Jun 2020 Status: Offline Points: 14	Post Options Post Reply Quote RGBlightsarebad Report Post Thanks(0) Quote Reply Topic: Still no RGB support Posted: 24 Jul 2020 at 1:57am
	I have a 450m/ac board and the RGB settings in polychrome have never worked right. Red and green are reversed and if I set a static color via the remote it will flash its opposite color so if its all read lights it flashes green randomly then goes back to red. I did this : If you haven't, you might want to try the following steps 1. Open CMD with Adminstrator 2. Direct the CMD to the folder where ASRRGBLED is located try : cd C:\Program Files (x86)\ASRock Utility\ASRRGBLED\Bin 3. After that copy this command ".\wICPFLASHADSBv2.exe/File=nu51_3.04" Nothing. Only fix I found is setting my front LED to the color I want with polychrome, uninstall it and set the colors static with a remote then synch it with the MB button. HOT GARBAGE