Issue with asrock B450m steel legend and ram |
Post Reply |
Author | |
Mortveiare
Newbie Joined: 25 Mar 2020 Status: Offline Points: 7 |
Post Options
Thanks(0)
Posted: 25 Mar 2020 at 11:03am |
I?™m having an issue with system not recognizing the ram that I?™ve purchased. It?™s coming up as single Channel 1866, when over riding the auto setting and updating them to manufacture specs, it won?™t boot unless I under clock from 3200 to 3000. And CPU z still see sit at 1866.
I am running the most recent bios. My system issue. Motherboard: ASRock 450m steel legend. CPU: ryzen 7 3700x Ram: g skill trident z neo (optimized for ryzen 7) model f4-3200c16q-32gtzn, dual channel, 4 sticks at 8 gigs a stick. Video card: Radeon 5700 xt Primary drive: m.2 nvme Samsung 970 pro, in the nvme compatible port Os: windows 10 pro 64 bit Accord to the mother board support, this specific model is listed as compatible with the ram I purchased In set of 2/4 with the Matisse core, which the 3700x has. But the ram still isn?™t being seen correctly. I found and purchased this ram using the ASRocks supported ram listed on the website. |
|
ThreeDee
Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396 |
Post Options
Thanks(0)
|
running the 3.20 bios?
|
|
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
|
Mortveiare
Newbie Joined: 25 Mar 2020 Status: Offline Points: 7 |
Post Options
Thanks(0)
|
I?™m running the 2.9 bios. You have to update the bios to get it to properly see the ryzen 3000 series and the nvme chip. I don?™t see a 3.2 on their support page
|
|
ThreeDee
Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396 |
Post Options
Thanks(0)
|
https://shop.jzelectronic.de/news.php?id=1584524677&sw=
so you are running 4 sticks of ram or just 2? If just 2 sticks ..are they plugged into slots A2 and B2? |
|
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
|
Mortveiare
Newbie Joined: 25 Mar 2020 Status: Offline Points: 7 |
Post Options
Thanks(0)
|
I?™m running 4 sticks of ram. All from the same set. That particular set is a 4 pack.
|
|
ThreeDee
Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396 |
Post Options
Thanks(0)
|
All seated properly? .. what happens when you run just 2 sticks?
|
|
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
|
Mortveiare
Newbie Joined: 25 Mar 2020 Status: Offline Points: 7 |
Post Options
Thanks(0)
|
Yes properly fully seated. Same issue if I use two.
|
|
ThreeDee
Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396 |
Post Options
Thanks(0)
|
You could try updating the bios .. or you might have a faulty memory controller on your CPU or a faulty motherboard ... maybe .. hard to say for sure without other parts to swap around.
If you run just one stick .. does it do it's rated speed? .. and you already stated that running 2 sticks (1 in A2, and the other in B2) has the same issue .. |
|
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
|
Mortveiare
Newbie Joined: 25 Mar 2020 Status: Offline Points: 7 |
Post Options
Thanks(0)
|
I tried one stick and swapping out one by one, same issue. Other ram that I have doesn?™t have this issue. It could be the sticks. It have another motherboard I can try later today.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |