No signal to monitor at HDMI or display port

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Just tried to assembly new pc, but can't get a signal to monitor on HDMI or display port!

MB:AsRock Z390 Phantom Gaming 7
CPU:Intel Core i9-9900K 3600
Memory:Kingston HyperX HX432C16FB3K4/128 4X32GB=128GB

Dr.Debug: jumps around 00->31->34->4C, or 00->4C

It would be very nice to get help

Thanks a lot for answers
melgoth 

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
melgoth Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 10 Apr 2020 Status: Offline Points: 5	Post Options Post Reply Quote melgoth Report Post Thanks(0) Quote Reply Topic: No signal to monitor at HDMI or display port Posted: 10 Apr 2020 at 12:53am
	Just tried to assembly new pc, but can't get a signal to monitor on HDMI or display port! MB:AsRock Z390 Phantom Gaming 7 CPU:Intel Core i9-9900K 3600 Memory:Kingston HyperX HX432C16FB3K4/128 4X32GB=128GB Dr.Debug: jumps around 00->31->34->4C, or 00->4C It would be very nice to get help Thanks a lot for answers melgoth

melgoth Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 10 Apr 2020 Status: Offline Points: 5	Post Options Post Reply Quote melgoth Report Post Thanks(0) Quote Reply Posted: 10 Apr 2020 at 2:27am
	After removing 1 memory from banks A1 and B1 and performing a cmos reset, I received a signal on my monitor . Then I saw that only the memory module in A2 was recognized by the BIOS. A new reset and the repeated installation of all memory banks with the 32GB HyperX modules also led to a successful boot with a display signal. But again only the modules in banks A1 and A2 were recognized. It looks as if the memory is not recognized correctly .

melgoth Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 10 Apr 2020 Status: Offline Points: 5	Post Options Post Reply Quote melgoth Report Post Thanks(0) Quote Reply Posted: 11 Apr 2020 at 1:30am
	In the meantime, as I wrote before, I got a signal to the monitor, but there are still problems. What have I done: I removed 2 HyperX HX432C16FB3K4 / 128 memory modules from banks A1 and B1 so that only memory modules were available in banks A2 and B2. After a CLRCMOS the second start was successful, so I think that the CPU is correct and most of the board too. However, only 1 memory module in bank A2 was recognized from the BIOS. After a second CLRCMOS, I reinstalled all 4 memory modules and started again successfully. Now only 2 memory modules were recognized by the BIOS, 1 from bank A2 and 1 from bank A1. Memory modules were not recognized in any bank of B. Now I flashed the bios from 1.0 to the latest 1.3. Then I put 1 memory module in B2 and booted successfully. So I tried several configurations. A1,B1,A2,B2 -> no boot, no display again, error code 4C A1,A2,B2 -> no boot, no display again, error code 4C A2,B2-> successful boot So again maybe the memory modules are not compatible or the board has a problem in case of using more then 2 banks?