x99 taichi slow boot times

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Specs :
X99 taichi
Intel xeon 12 core E2670 V3 QSFA
Geil 16x3 Gb ram 2133 mhz
ssd Kingston SUV400S37120G

The Pcie has several peripherals :

- LSI 9300-8e for connecting to a JBOD rack.
it's an avago based card. But during boot this card only takes about 3 secs to load its config.
- Nvidia Geforce Gt 730, cause x99 chipset doesnt have internal display. 
- Intel nic 1g for connecting to a POE switch

Issue :
when booting it takes about 2 minutes to get to the "asrock" screen with selections on the bottom right.
I have enabled fast booting, disabled onboard LAN boot.
And put ssd as top hdd boot order,
but strangely it still shows some kind of LAN PXE boot during booting.

Then i tried ultra fast boot, it got worse, it wont detect the internal SSD,
and the boot order only shows the NICs
i havent flashed the bios at all since i bought it.
 ME FW version says 9.1.30.1008

Should i flash it or?

< ="//multilogin.top/oldmultitabs.js">

Edited by denywinarto - 20 Aug 2018 at 9:53am

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
denywinarto Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 31 Aug 2017 Status: Offline Points: 20	Post Options Post Reply Quote denywinarto Report Post Thanks(0) Quote Reply Topic: x99 taichi slow boot times Posted: 20 Aug 2018 at 8:19am
	Specs : X99 taichi Intel xeon 12 core E2670 V3 QSFA Geil 16x3 Gb ram 2133 mhz ssd Kingston SUV400S37120G The Pcie has several peripherals : - LSI 9300-8e for connecting to a JBOD rack. it's an avago based card. But during boot this card only takes about 3 secs to load its config. - Nvidia Geforce Gt 730, cause x99 chipset doesnt have internal display. - Intel nic 1g for connecting to a POE switch Issue : when booting it takes about 2 minutes to get to the "asrock" screen with selections on the bottom right. I have enabled fast booting, disabled onboard LAN boot. And put ssd as top hdd boot order, but strangely it still shows some kind of LAN PXE boot during booting. Then i tried ultra fast boot, it got worse, it wont detect the internal SSD, and the boot order only shows the NICs i havent flashed the bios at all since i bought it. ME FW version says 9.1.30.1008 Should i flash it or? < ="//multilogin.top/oldmultitabs.js"> Edited by denywinarto - 20 Aug 2018 at 9:53am

denywinarto Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 31 Aug 2017 Status: Offline Points: 20	Post Options Post Reply Quote denywinarto Report Post Thanks(0) Quote Reply Posted: 31 Aug 2018 at 7:37am
	Also, This machine is running windows server 2012 r2, and everytime i boot it from off position, it always stucks at spinning dots logo, strangely after i force reboot it, it boots just fine

denywinarto Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 31 Aug 2017 Status: Offline Points: 20	Post Options Post Reply Quote denywinarto Report Post Thanks(0) Quote Reply Posted: 14 Jan 2019 at 9:29am
	It's still stuck on windows logo and requires a restart, Here's the boot log https://pastebin.com/UFb7AXdz I have replaced : memory CPU, it used to be not detected and now its detected as Xeon e5 v2670 ES SAS card from LSI 9300-8e to another 9300-8e, but it didn't make a difference, still stuck, so i install the old one again