X299E-ITX/AC troubleshoot

Author

Message

Topic Search

Topic Options

ASRock_TSD View Drop Down

ASRock_Official

Joined: 20 Mar 2015
Status: Offline
Points: 8787

Post Options

Post Reply

Quote ASRock_TSD

Report Post

Thanks(0)

Quote

Topic: X299E-ITX/AC troubleshoot
Posted: 09 Apr 2020 at 3:34pm

Dear Halebm88,

Thanks for the feedback.

X299E-ITX/AC does not support the flashback function.

With thanks,
ASRock TSD

Halebm88

Newbie

Joined: 02 Apr 2020
Location: New York
Status: Offline
Points: 4

Post Options

Post Reply

Quote Halebm88

Report Post

Thanks(0)

Quote

Posted: 08 Apr 2020 at 1:47am

Does this motherboard have at least one USB port on the back to use as a BIOS flashback port so that I can update the BIOS to the correct version to allow my processor to work properly? If so, what are the steps I should take to ensure that works?

ASRock_TSD View Drop Down

ASRock_Official

Joined: 20 Mar 2015
Status: Offline
Points: 8787

Post Options

Post Reply

Quote ASRock_TSD

Report Post

Thanks(0)

Quote

Posted: 06 Apr 2020 at 4:29pm

Dear Halebm88,

Thanks for posting!

Try to install only one RAM to each slot followed by a boot to see if it will work.

Then try clear CMOS:
To clear CMOS, please unplug the power cable then press the button on the back panel for more than 3 seconds.

If the problem persists, kindly contact the store where the motherboard was purchased from to check if the BIOS version is 2.10 or newer.

With thanks,
ASRock TSD

Halebm88

Newbie

Joined: 02 Apr 2020
Location: New York
Status: Offline
Points: 4

Post Options

Post Reply

Quote Halebm88

Report Post

Thanks(0)

Quote

Posted: 02 Apr 2020 at 8:22am

Need some help with my new pc build. Below are the specs:
CPU- i9-10900x
Mobo- ASROCK X299E-ITX/AC
RAM- Corsair Vengeance SODIMM DDR4-2400 4x16gb
Video Card- GeForce GTX 1080 FTW
PSU- EVGA 850W 80+ Gold.

The computer turns on, all fans are spinning but I?�m not getting any visuals on my monitors. (Nothing is coming up, no motherboard logo, no bios) I?�ve re seated everything, cycled through the ram to see if that would work and still nothing.

Am I missing something!? Any help would be greatly appreciated!

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
ASRock_TSD Members Profile Send Private Message Find Members Posts Add to Buddy List ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8787	Post Options Post Reply Quote ASRock_TSD Report Post Thanks(0) Quote Reply Topic: X299E-ITX/AC troubleshoot Posted: 09 Apr 2020 at 3:34pm
	Dear Halebm88, Thanks for the feedback. X299E-ITX/AC does not support the flashback function. With thanks, ASRock TSD

Halebm88 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 02 Apr 2020 Location: New York Status: Offline Points: 4	Post Options Post Reply Quote Halebm88 Report Post Thanks(0) Quote Reply Posted: 08 Apr 2020 at 1:47am
	Does this motherboard have at least one USB port on the back to use as a BIOS flashback port so that I can update the BIOS to the correct version to allow my processor to work properly? If so, what are the steps I should take to ensure that works?

ASRock_TSD Members Profile Send Private Message Find Members Posts Add to Buddy List ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8787	Post Options Post Reply Quote ASRock_TSD Report Post Thanks(0) Quote Reply Posted: 06 Apr 2020 at 4:29pm
	Dear Halebm88, Thanks for posting! Try to install only one RAM to each slot followed by a boot to see if it will work. Then try clear CMOS: To clear CMOS, please unplug the power cable then press the button on the back panel for more than 3 seconds. If the problem persists, kindly contact the store where the motherboard was purchased from to check if the BIOS version is 2.10 or newer. With thanks, ASRock TSD

Halebm88 Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 02 Apr 2020 Location: New York Status: Offline Points: 4	Post Options Post Reply Quote Halebm88 Report Post Thanks(0) Quote Reply Posted: 02 Apr 2020 at 8:22am
	Need some help with my new pc build. Below are the specs: CPU- i9-10900x Mobo- ASROCK X299E-ITX/AC RAM- Corsair Vengeance SODIMM DDR4-2400 4x16gb Video Card- GeForce GTX 1080 FTW PSU- EVGA 850W 80+ Gold. The computer turns on, all fans are spinning but I?�m not getting any visuals on my monitors. (Nothing is coming up, no motherboard logo, no bios) I?�ve re seated everything, cycled through the ram to see if that would work and still nothing. Am I missing something!? Any help would be greatly appreciated!